Subscribe to Our Youtube Channel
Related Manuals for UNITED UHQ-887
Summary of Contents for UNITED UHQ-887
- Page 1 QUARTZ HEATER UHQ-887 INSTRUCTIONS MANUAL This product is only suitable for well insulated spaces or occasional use READ CAREFULLY AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE...
-
Page 2: Safety Regulations
SAFETY REGULATIONS 1. The heater should be placed and used at a suitable place, forbid putting the heater under a power socket. 2. In the range that can be radiated around the heater, do not put any flammable materials. The appliance must not be used in spaces with flammable gas and dust either. -
Page 3: Operation
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. - Page 4 can set the heater to power on after 1 to 15 hours by press “+” and “-”. 2.3. Power on: In standby mode, press “ON/OFF” to start up, the heater will start working with 2200W, all heating indicator “ ” light up. 2.4.
- Page 5 （1）Turning on power switch, the heater enters on standby mode, power indication “ ” light up, press “ON/OFF” again, the heater will start working with all power at 2200W, and heating indication “ ” will up. If you press “-”, the heater will start working with half power that 1100W, and half heating indication “...
- Page 6 sensing” status as explained below: “Temperature sensing” description: When the heater is working with full power (four tubes all light up), if the sensor detects the ambient temperature is higher than 28℃, two tubes on the heater will go out and the other two tubes will keep lighting up.
- Page 7 1. Time calibration setting In power saving mode, the power saving indication “ ” lights up. (1-1) Press the button “SETTING” to set the time to the current time. Press “+” or “-” to adjust current date from Monday to Sunday. (If today is Monday, you can set date to “Mon” and the indicator lights up.) Then press “SETTING”...
- Page 8 Weekly date and time settings times of press Stage The heater Condition Display Press “+” Press “-” “SETTING” Adjust the date to First The date light flickers Date forward Date backward the current date Time calibration every pressing every pressing setting Adjust the time to increases one...
-
Page 9: Remote Control
REMOTE CONTROL = ON/OFF M = MODE S = SETTING The remote control has the same function as the control panel. MAINTENANCE 1. Please pull out the plug and let the unit cool down completely before storing or maintaining. 2. You should clean the appliance frequently using a soft cloth. You must pull down the screws and nut, take off the net cover before cleaning the inner surface of the radiation cover. - Page 10 Model identifier(s): UHQ-887 Item Symbol Value Unit Item Unit Type of heat input, for electric storage local space heaters only (select Heat output one) [no] Nominal heat output Pnom manual heat charge control, with integrated thermostat Minimum heat manual heat charge control with room and/or outdoor...
-
Page 11: Notice About Recycling
Low Voltage Directive: 14/ 35 / EU CE Marking: 93 / 68 / EEC RoHS Directive: 11 / 65 / EU & 15 / 863 / EU The detailed declaration of conformity can be found at www.united-electronics.gr EXCLUSIVE IMPORTER IN GREECE: Kalliopi Karyda & Co LP 87A, 17th November Str - P.C.
Need help?
Do you have a question about the UHQ-887 and is the answer not in the manual?
Questions and answers