UNITED UHR-873 Instruction Manual

UNITED UHR-873 Instruction Manual

Oil-filled radiator

Advertisement

Oil-Filled Radiator
INSTRUCTION MANUAL
Model UHR-873
This product is only suitable for well insulated spaces or
occasional use
DO NOT TURN THE HEATER UPSIDE-DOWN DURING OPERATION.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UHR-873 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for UNITED UHR-873

  • Page 1 Oil-Filled Radiator INSTRUCTION MANUAL Model UHR-873 This product is only suitable for well insulated spaces or occasional use DO NOT TURN THE HEATER UPSIDE-DOWN DURING OPERATION.
  • Page 2: Important Safeguards

    IMPORTANT SAFEGUARDS 1. Read the instructions carefully before use and save them for future reference. 2. Always disconnect the heater from the main supply when not in use and when cleaning. 3. Do not leave the heater unattended while in operation. 4.
  • Page 3: Parts Description

    responsible for their safety 22. Children should be supervised to ensure that they do not play with the appliance. ASSEMBLY Remove the heater and all the accessories from the carton. 1. Turn the heater upside down. 2. Position the wheel base assemblies between the end fins. 3.
  • Page 4 OPERATING YOUR OIL-FILLED RADIATOR Place the heater on the floor at least 90 cm away from the wall and any other objects such as furniture, curtains or plants. Make sure the power supply used corresponds to the one on the rating label. With the thermostat control switch and the power setting switches in the '0' position, plug the heater into the main power supply.
  • Page 5 Clock setting IMPORTANT! • Do not turn the timer dial anticlockwise. Always turn in clockwise direction. • The timer is in effect an electric clock and only works when the plug is connected to the power supply. Whenever the plug is disconnected, the timer stops and must be reset.
  • Page 6 Please note when you first use your heater, all the segment are • outwards. You must pull outwards those segments for the period(s) that you want the heater to work. (If you want to bypass the timer, check that all the 96 segments are outward) (see Fig Timer operation Plug in the heater.
  • Page 7 Fan Operation 1. The fan can be switched on by pushing the button of the fan on the control panel. The fan is switched on when the push button is in the inward position and off when the button is in the outward position.
  • Page 9: Notice About Recycling

    ErP Directive 09 / 125 / EC CE Marking: 93 / 68 / EEC RoHS Directive: 11 / 65 / EU The detailed declaration of conformity can be found at www.united-electronics.gr EXCLUSIVE IMPORTER IN GREECE: Amiridis – Savidis S.A. 87A, 17th November Str - P.C. 55534...

Table of Contents