Advertisement

Quick Links

EEQ47310L
EN
Dishwasher
User Manual

Advertisement

Table of Contents
loading

Summary of Contents for Electrolux EEQ47310L

  • Page 1 EEQ47310L Dishwasher User Manual...
  • Page 2: Table Of Contents

    12. TECHNICAL INFORMATION................. 26 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
  • Page 3 ENGLISH of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 • years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a...
  • Page 4: Safety Instructions

    If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. WARNING: Knives and other utensils with sharp • points must be loaded in the basket with their points down or placed in a horizontal position.
  • Page 5 ENGLISH 2.4 Use be replaced, this must be carried out by our Authorised Service Centre. • Do not put flammable products or • Connect the mains plug to the mains items that are wet with flammable socket only at the end of the products in, near or on the appliance.
  • Page 6: Product Description

    2.6 Disposal separately: These lamps are intended to withstand extreme physical conditions in household appliances, WARNING! such as temperature, vibration, Risk of injury or suffocation. humidity, or are intended to signal • Disconnect the appliance from the information about the operational mains supply.
  • Page 7: Control Panel

    ENGLISH 3.1 Beam-on-Floor Beam-on-Floor is off when the appliance is deactivated. Beam-on-Floor is a light displayed on the floor below the appliance door. When AirDry is activated • When the programme starts, a red during the drying phase, the light comes on and stays on for the projection on the floor may duration of the programme.
  • Page 8: Programme Selection

    Indicator Description Salt indicator. It is on when the salt container needs refilling. Refer to "Before first use". Machine Care indicator. It is on when the appliance needs internal cleaning with the Machine Care programme. Refer to "Care and cleaning".
  • Page 9 ENGLISH 5.4 Programmes overview Pro‐ Type of load Degree of Programme phases EXTRAS gramme soil Quick • Crockery • Fresh • Wash 50 °C • ExtraPower • Cutlery • Intermediate rinse • GlassCare • Final rinse 45 °C • AirDry •...
  • Page 10: Basic Settings

    Consumption values Water (l) Energy (kWh) Duration (min) 1) 2) Programme Quick 9.4 -11.4 0.57 - 0.69 Pre-rinse 3.7 - 4.5 0.02 - 0.05 9.3 - 11.4 0.82 - 0.94 1h 30min 9.1 - 11.1 1.01 - 1.13 2h 40min 9.2 - 11.2...
  • Page 11 ENGLISH Number Settings Values Description Latest pro‐ Enable or disable the automatic selec‐ gramme selec‐ Off (default) tion of the most recently used pro‐ tion gramme and options. 1) For more details, refer to the information provided in this chapter. You can change the basic settings in How to enter setting mode setting mode.
  • Page 12 6.2 The water softener The water softener should be adjusted according to the hardness of the water in The water softener removes minerals your area. Your local water authority can from the water supply, which would have advise you on the hardness of the water a negative effect on the washing results in your area.
  • Page 13 ENGLISH In case of the high water softener setting, results are satisfactory while using multi- it may occur also in the middle of the tablets only, it is possible to deactivate programme, before the rinse (twice the notification for refilling rinse aid. during a programme).
  • Page 14: Before First Use

    6.6 Key tones CAUTION! Do not try to close the The buttons on the control panel make a appliance door within 2 click sound when you press them. You minutes after automatic can deactivate this sound. opening. This can cause damage to the appliance.
  • Page 15: Daily Use

    ENGLISH CAUTION! The compartment (A) is for rinse aid only. Do not fill it with detergent. CAUTION! Only use rinse aid designed specifically for dishwashers. 6. Turn the cap of the salt container 1. Press the release button (D) to open clockwise to close the salt container.
  • Page 16 8.4 How to activate EXTRAS 2. Put the detergent, in powder or tablets, in the compartment (A). 1. Select a programme using MY TIME 3. If the programme has a prewash selection bar. phase, put a small quantity of 2.
  • Page 17: Hints And Tips

    ENGLISH 8.9 Opening the door while the 2. Press repeatedly until the display appliance operates shows the desired delay time (from 1 to 24 hours). Opening the door while a programme is The light related to the button is on. running stops the appliance.
  • Page 18 • You can use dishwasher detergent, • Make sure that the water softener rinse aid and salt separately or you level is correct. If the level is too high, can use the multi-tablets (e.g. ''All in the increased quantity of salt in the 1'').
  • Page 19: Care And Cleaning

    ENGLISH 9.6 Unloading the baskets • Do not wash in the appliance items that can absorb water (sponges, 1. Let the tableware cool down before household cloths). you remove it from the appliance. Hot • Put hollow items (cups, glasses and items can be easily damaged.
  • Page 20 CAUTION! If unable to remove the foreign objects, contact an Authorised Service Centre. 1. Disassemble the filters system as 2. Remove the filter (C) out of filter (B).
  • Page 21: Troubleshooting

    ENGLISH 8. Put back the filter (B) in the flat filter 2. Wash the spray arm under running (A). Turn it clockwise until it locks. water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. CAUTION! An incorrect position of the filters can cause bad...
  • Page 22 With some problems, the display shows an alarm code. Problem and alarm code Possible cause and solution You cannot activate the • Make sure that the mains plug is connected to the appliance. mains socket. • Make sure that there is no damaged fuse in the fuse box.
  • Page 23 ENGLISH Problem and alarm code Possible cause and solution Technical malfunction of • Switch the appliance off and on. the appliance. The display shows iC0 or iC3. The level of water inside • Switch the appliance off and on. the appliance is too high. •...
  • Page 24 For alarm codes not described in the The PNC can be found on the rating table, contact an Authorised Service plate on the appliance door. You can Centre. also check the PNC on the control panel. Before checking the PNC, make sure the WARNING! appliance is in the programme selection.
  • Page 25 ENGLISH Problem Possible cause and solution Unusual foam during wash‐ • Use the detergent designed specifically for dish‐ ing. washers. • Use a detergent from a different manufacturer. • Do not pre-rinse dishes under running water. Traces of rust on cutlery. •...
  • Page 26: Technical Information

    12. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818 - 898 / 550 Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8) Water supply max 60 °C...
  • Page 28 www.electrolux.com/shop...

Table of Contents