Deep Alarm; Anchor Alarm - Raymarine Raydata Installation And Operating Handbook

Chapter 6: The Display Pages

Deep Alarm

To display this sub-page, press
or three times from the Main Depth page.
This page, and its associated Deep Alarm Adjust page, are identical to
the Shallow Alarm pages, except that they are used to display and
update the deep alarm limit rather than the shallow alarm limit.

Anchor Alarm

To display this sub-page, press
Ú Ú Ú Ú Ú
This page shows the current settings for the upper and lower values
that will set off an anchor alarm or, if the alarm has been turned off, the
text "ALARM OFF". The units are the same as those for the Main Depth
value.
Press and hold
alarm either from off to on or from on to off.
For detailed information on using and setting alarms, refer to Chapter 5.
from the Main Depth page.
Ú Ú Ú Ú Ú
and
Ù Ù Ù Ù Ù
once from the Shallow Alarm page,
Ù Ù Ù Ù Ù
once from the Deep Alarm page, or
Ù Ù Ù Ù Ù
together for three seconds to toggle the
47