Minimum Depth; Shallow Alarm - Raymarine Raydata Installation And Operating Handbook

46

Minimum Depth

To display this sub-page, press
This page shows the minimum depth that has been encountered since
the value was last reset. The units and depth offset are the same as
those for the Main Depth value.
To reset the minimum depth value, press
current depth will be displayed as the new minimum depth.

Shallow Alarm

To display this sub-page, press
or twice from the Main Depth page.
This page shows the current setting of the depth limit value that will set
off a shallow alarm or, if the alarm has been turned off, the text "ALARM
OFF". The units and depth offset are the same as those for the Main
Depth value.
Press and hold
alarm either from off to on or from on to off.
For detailed information on using and setting alarms, refer to Chapter 5.
RAYDATA Installation and Operation Handbook
Ù Ù Ù Ù Ù
Ù Ù Ù Ù Ù
Ú Ú Ú Ú Ú Ù Ù Ù Ù Ù
and together for three seconds to toggle the
from the Main Depth page.
Ú Ú Ú Ú Ú Ù Ù Ù Ù Ù
and together. The
once from the Minimum Depth page,