Dealing With An Alarm - Raymarine Raydata Installation And Operating Handbook

42 RAYDATA Installation and Operation Handbook
If more that one alarm is active, the alarms will be handled in order of
priority, as follows:
1. Watch alarm
2. Shallow alarm
3. Anchor alarm
4. Deep alarm
5. Temperature alarm

Dealing with an Alarm

To silence an audible alarm, press any key. This turns the audible alarm
off for 30 seconds. If, after this period, the alarm condition still exists, the
audible alarm will sound again.
The alarm text message remains on the display, and the SeaTalk alarm
remains active, until the data value returns within the safe limits set.
You may wish to adjust the alarm limits, depending on the current
temperature or depth conditions, or to disable an alarm completely.
These procedures are described in Section 5.2. You can also disable
the audible alarm by selecting the appropriate option in the Setup
pages (see Chapter 4).
If your system includes a SeaTalk autopilot with a Watch alarm facility,
the RayData will respond to a Watch alarm but cannot set it or disable it.
You can acknowledge a Watch alarm by pressing any key, which turns
off the audible alarm for three minutes.