Adjusting The Anchor And Temperature Alarm Limits - Raymarine Raydata Installation And Operating Handbook

40

Adjusting the Anchor and Temperature Alarm Limits

The anchor and temperature alarm thresholds are both set in the same
way. The anchor alarm is used in the example displays.
For the anchor alarm, the minimum and maximum alarm depths you
can select, and the resolution of the alarms, are the same as for the
shallow and deep alarms.
For the temperature alarm, the range is 5 to 104°F (-10 to +40°C), with a
resolution of 0.1°.
To adjust the anchor or temperature alarm values:
1. Display the appropriate alarm page:
2. Press
- For the anchor alarm, press
described above, or
- For the temperature alarm, use the DEPTH key as many times
as required to display the Temperature page, and then
Ù Ù Ù Ù Ù
press .
The page shows the current alarm limits, or ALARM OFF if the
alarm is turned off. To toggle the alarm between on and off, press
Ú Ú Ú Ú Ú Ù Ù Ù Ù Ù
and hold and
Ú Ú Ú Ú Ú Ù Ù Ù Ù Ù
and together. The lower adjust page is displayed.
RAYDATA Installation and Operation Handbook
Ù Ù Ù Ù Ù
from the Deep Alarm page
Ú Ú Ú Ú Ú
from the Main Depth page.
together for six seconds.