Switching The Appliance On For The First Time; Advice Regarding The First Wash Cycle - Hotpoint FDFSM 31011 FUTURA Instructions For Use Manual

Hide thumbs Also See for FDFSM 31011 FUTURA:
Table of Contents

Advertisement

attached, to prevent it coming away
while the machine is in use and
causing a flood.
a "Jubilee" type clip.
*
Anti-flooding protection
To ensure floods do not occur, the dishwasher:
- is provided with a special system which blocks the water supply
in the event of anomalies or leaks from inside the appliance.
Some models are also equipped with the supplementary safety
*
device New Acqua Stop
, which guarantees anti-flooding
protection even in the event of a supply hose rupture
WARNING: HAZARDOUS VOLTAGE!
contains live electrical parts.
that occur if these regulations are not observed
All manuals and user guides at all-guides.com
Ensure the drain hose is securely
Fit hose to waste securely using
.

Switching the appliance on for the first time

Advice regarding the first wash cycle

After the installation, remove the stoppers from the racks and the
retaining elastic elements from the upper rack, if any.
Immediately before the first washing, completely fill the salt
overflow: this is normal and is not a cause for concern. Select
refined salt). - After the salt has been poured into the machine,
If the salt dispenser is not filled, the water softener and the
heating element may get damaged as a result.
The machine has a buzzer/set of tones
dishwasher model
) to inform the user that a command has
been implemented: power on, cycle end etc.
The symbols/indicator lights/LEDs on the control panel/
display may vary in colour and may have a flashing or fixed
(depending on the dishwasher model)
light
The display provides useful information concerning the
type of wash cycle, wash cycle phase, remaining time,
temperature etc.
*
GB
.
(depending on the
.
7

Advertisement

Table of Contents
loading

Table of Contents