Milk Frother - SEVERIN 3584000 Instructions For Use Manual

GB

Milk frother

Dear Customer,
Before using the appliance, read the
following instructions carefully and keep
this manual for future reference. The
appliance must only be used by persons
familiar with these instructions.
Connection to the mains supply
The appliance should only be connected to
an earthed socket installed in accordance
with the regulations. Make sure that the
supply voltage corresponds with the
voltage marked on the rating label of the
appliance. This product complies with all
binding CE labelling directives.
Familiarisation
1. Lid
2. Stirring tool with coil attachment
3. Milk container with handle
4. Power cord with plug
5. Base
6. Control panel
FUNCTION = Selection:
more milk froth
less milk froth
heating only
cold frothing
ON/OFF = On/Off switch
10
Important safety instructions
∙ In order to avoid hazards,
repairs to this electrical
appliance or its power cord
must be carried out by our
customer service. If repairs
are needed, please contact
our customer service
department by phone or
email (see appendix).
∙ Before cleaning the
appliance, ensure it is
disconnected from the
power supply and has
cooled down completely.
∙ Detailed information on
cleaning can be found in
the section Cleaning and
care.
∙ Do not immerse the milk
container or base in
liquids and do not clean
them under running
water.