Checking Alignment - Raymarine Mk II Installation Manual

20

Checking alignment

Move the rudder from hardover to hardover and check that at all rudder angles:
• all moving parts of the sensor remain free from any obstructions
• the sensor and connecting rod remain accurately aligned
• the ball joints do not bind
Connecting to the course computer
1. The rudder position sensor is supplied with 10 m (32 ft) of cable. Route the cable to the
course computer, taking into account the EMC installation guidelines detailed in the
course computer installation manual.
2. Connect the four cores of the cable (color for color) to the Rudder terminals on the
course computer as shown.
If the standard cable is not long enough, your Raymarine dealer can supply a 10 m (30 ft) exten-
Note:
sion cable (part number: D173).
Red Yellow
Screen Green
FLUXGATE
Course computer
Red Yellow Red
Blue Screen Screen Green
RATE GYRO RUDDER
Blue Red
Screen
SeaTalk
NMEA
MK II Wheel Drive
Screen Yellow
Yellow Red
SeaTalk
CLUTCH