Units; Depth Units; Temp. Units; Speed Units - Raymarine DS400X Owner's Handbook Manual

Chapter 6: Sounder Set Up
6. When the alarm clock sounds, it is accompanied by a message box
labeled ALARM CLOCK displaying the time.
The default setting is OFF.

UNITS...

You can set the units for each system parameter. The units you set will be
used to display all data, including information received from other
instruments on the system.

Depth Units

FEET (default)
•
FATHOMS
•
METERS (Available in CE models only)
•

Temp. Units

FAHRENHEIT (default)
•
• CENTIGRADE

Speed Units

KNOTS (default)
•
MILES PER HOUR
•
KM PER HOUR
•

Distance Units

NAUTICAL MILES (default)
•
STATUTE MILES
•
KILO METERS
•
Note: VRM distance is measured by the transducer's paddlewheel and is
based on the Depth units you have set. If Depth is set in feet or fathoms, Dis-
tance is displayed in feet. If Depth is set in meters, Distance is also set in
meters. (METERS settings are only available in CE models.)
MAIN MENU
Figure 6-5: Alarm Clock
D6758-1
59