Chapter 6: Sounder Set Up; Introduction - Raymarine DS400X Owner's Handbook Manual

Chapter 6: Sounder Set Up

Chapter 6: Sounder Set Up

6.1 Introduction

Once you have installed your DS400X or DS500X and are familiar with its
basic operation, you need to set it up so that it displays information according
to your preferences. The SYSTEM SET UP option enables you to set up your
system configuration and personal preferences.
In most cases, you will only need to use these options when you first set up
your system. As you become more familiar with your system, you may
decide to customize some aspects, such as the Alarms and Offset and
Calibrate settings.
In most cases, you will only need to use the Sounder Setup options when you
first set up your system. As you become more familiar with your system, you
may decide to customize some aspects. At the end are displayed the serial
number of your sounder and the software version running. This information
may be requested by Raymarine staff should technical support become
necessary.
➤
To access the Sounder Set Up menu items:
1. Press the MENU key. The Main Menu appears.
MENU
2. Press the
3. Press the trackpad > key or ENTER to select.
4. Press the
5. Press the trackpad < or > keys to select the desired option.
For menu items with sub-menu items (menu title in all CAPITALS...),
press the trackpad > key or ENTER to browse the sub-menus.
6. Press QUIT to exit when finished.
QUIT
Figure 6-1 also demonstrates how to access the Sounder Set Up Menu Items.
A description of how to browse the menu and make selections is outlined in
Selecting MENU Items on page 25.
trackpad keys to navigate to SOUNDER SET UP...
or
trackpad keys to browse to the desired menu item.
or
51