Advertisement
Available languages
Available languages
6
GETTING STARTED
Charging Unit Prior to First Use
Charge unit for 24 hours prior to first use. Use only the USB charger provided. If a USB charager is not provided, a user supplied USB
charger with the following specifications is required to charge this product: USB Type-A, Rated Output: 5.0 VDC, 1.0 A. Plug the
USB-charger into a wall outlet and connect the charging cord to the unit. Make sure you turn the unit OFF before charging. The unit will
not charge if the unit is ON. See "Cleaning and Troubleshooting Your Waterpik® Water Flosser" for guidance on how to look after your
Fill
battery. The Waterpik® Water Flosser will stay charged for up to 2 weeks depending on use.
Filling the Reservoir
Unplug charging cord from unit prior to filling with water and during use. Lift flip top on reservoir and fill the reservoir with
lukewarm water.
Insert
Inserting and Removing Tips
Eject
Insert tip into the center of the knob at the top of the Water Flosser handle. Press firmly until the tip clicks into place. To remove the tip
from the handle, press the tip eject button and pull tip from the handle.
CAUTION: Do not press tip eject button while unit is running.
Advertisement
