Turning Lanesense On Or Off; Lanesense Warning Message - Dodge HORNET 2024 Owner's Manual

130 STARTING AND OPERATING
When both lane markings are detected and the driver unin-
tentionally drifts out of the lane (no turn signal applied), the
LaneSense system provides a haptic warning in the form of
torque applied to the steering wheel to prompt the driver to
remain within the lane boundaries. If the driver continues to
unintentionally drift out of the lane, the LaneSense system
provides a visual warning through the instrument cluster
display to prompt the driver to remain within the lane
boundaries.
The driver may manually override the haptic warning by
applying torque to the steering wheel at any time.
When only a single lane marking is detected and the
driver unintentionally drifts across the lane marking
(no turn signal applied), the LaneSense system pro-
vides a visual warning through the instrument cluster
display to prompt the driver to remain within the lane.
When only a single lane marking is detected, a haptic
(torque) warning will not be provided.
NOTE:
When operating conditions have been met, the Lane-
Sense system will monitor if the driver's hands are on
the steering wheel and provides an audible warning to
the driver when the driver's hands are not detected on
the steering wheel. The system will cancel if the driver
does not return their hands to the wheel.

TURNING LANESENSE ON OR OFF

The LaneSense on/off button is located on the on the
end of the multifunction lever, to the left of the steering
wheel.
LaneSense On/Off Button
To turn the LaneSense system on, push the LaneSense
button. The white LaneSense telltale is shown in the
instrument cluster display with gray lane lines when the
system is first turned on until lane markings are
detected.
To turn the LaneSense system off, push the LaneSense
button again. A "LaneSense OFF" message will be
shown in the instrument cluster display.
NOTE:
The LaneSense system will retain the last system state
on or off from the last ignition cycle when the ignition is
changed to the ON/RUN position.

LANESENSE WARNING MESSAGE

The LaneSense system will indicate the current lane
drift condition through the instrument cluster display.
When the LaneSense system is on, both lane lines are
gray when both of the lane boundaries have not been
detected. The LaneSense telltale will be white.
System On (Gray Lane Lines)
NOTE:
When the Driver Assist screen is not selected in the
instrument cluster display, the LaneSense status will be
shown as a small icon at the bottom of the speedom-
eter. The vehicle is represented by a telltale in the
shape of a triangle that will change color along with the
lane lines as the LaneSense status changes.
Left Lane Departure — Only Left Lane Detected
•
When the LaneSense system is on, the left lane line
will change from gray to white, and the LaneSense
telltale changes from white to green when only the
left lane marking has been detected and the system
is ready to provide visual warnings in the instrument
cluster display if an unintentional lane departure
occurs.