Table of Contents
Advertisement
S e t t i n g s
Default profile
•
activated when you connect to the selected enhancement
Automatic answer
•
automatically after 5 seconds. If (QTN_FORM_RINGING_OPTIONS)Incoming call
alert is set to
Lights
— to set the lights permanently On. Select
•
on for 15 seconds after a keypress.
Text phone
— Select
•
instead of headset or loopset settings.
If your device is provided with a hearing aid coil, select
aid mode
>
On
is shown when the
Configuration
You can configure your device with settings that are required for certain services.
Your service provider may also send you these settings. See "Configuration setting
service," p. 12.
Select
Menu
>
Settings
Default config. sett.
•
the configuration settings of the service provider as default settings, select
Options
>
Set as
Activ. def. in all apps.
•
supported applications
Preferred access pt.
•
and select
Options
bearer, and packet data access point or GSM dial-up number.
Connect to support
•
service provider
Device manager sett.
•
updates. This option may not be available, depending on your device. See
"Software updates over the air," p. 60.
— to select the profile that you want to be automatically
— to set the device to answer an incoming call
Beep once
or Off, automatic answer is off.
Use text phone
to optimize the sound quality when using a t-coil hearing aid.
T-coil hrng. aid mode
>
Configuration
— to view the service providers saved in the device. To set
default.
— to activate the default configuration settings for
— to view the saved access points. Scroll to an access point,
>
Details
to view the name of the service provider, data
— to download the configuration settings from your
— to allow or prevent the device from receiving software
Automatic
>
Yes
to use the text device settings
Hearing aid
is active.
and from the following options:
58
to set the lights
>
T-coil hrng.
Advertisement
Table of Contents
