TecTecTec KLYR Manual page 11

MODE:
SCAN
1. HOLD THE POWER BUTTON FOR
8 SECONDS. AT THE SAME TIME,
SWEEP THE RANGEFINDER FROM
OBJECT TO OBJECT.
2. THE DISPLAY SCREEN WILL SHOW
CONTINUOUS DISTANCE MEASURE-
MENT. PRESS THE POWER BUTTON
TO FIND THE DISTANCE TO A
NEW TARGET.
USE SCAN MODE WHILE IN "NORMAL MODE" JUST BY HOLDING DOWN
THE POWER BUTTON WHEN DETERMINING THE DISTANCE TO HAZARDS
AND FOR UNDERSTANDING MULTIPLE DISTANCES. USE IN WINDY CON-
DITIONS AND FOR TARGETS SURROUNDED BY BACKGROUND OBJECTS.
NOTE: NORMAL MODE AND SCAN MODE WILL NOT SHOW THE FLAG ICON
(WHICH IS THE PIN SEEKER MODE INDICATOR)
1
179
Yd
M1
SCAN
2
65
Yd
M1
SCAN