Kenmore PG-4030400LN User & Care Manual page 31

Drip Cup
13
 LP tank is sold separately. Use only with an OPD (over-fill protection device) equipped LP tank.
Fill and leak check before attaching the tank to the grill and regulator. Place the LP tank into the
hole in the grill base with the tank collar opening facing the back as shown. Raise the tank holder
to hold the LP tank securely in place. Secure the regulator hose to the slot hole of the right side
panel with the hose retaining pin.
 Use (1) M4x13 screw to install the match holder to the right side panel .
 Install the drip box into the grease tray. Install the grease tray into the cart through the back.
 Unscrew the igniter cap from the control panel. Insert one AA battery (provided) into the battery
slot with positive end (+) facing outward. Screw the cap back onto the panel.
 Roll the grill into a place of operation. Once in place, press down on the locking levers of both
swivel casters with brake to lock the casters in place, preventing the grill from moving while in
operation. See bottom figure below..
M4x13 Shoulder Screw
Qty: 1 pc
31