Adding Channels To Memory - Raymarine Ray101E Owner's Handbook Manual

24

4.14 Adding Channels to Memory

The Ray101E can store any channel (including Private Channels). The stored
channels are the ones scanned in the Saved (Memory) Scan mode.
➤
To Add Channels to Memory
1. During normal operation mode, use the UP/DOWN key to select the
desired channel for programming.
2. Press and hold the SCAN/SAVE key for 3 seconds.
The SAVED icon appears to indicate the current channel has been saved in
memory. Any number of channels can be saved as memory channels.
➤
To Delete Channels from Memory
1. During the normal mode, use the UP/DOWN key to select the channel to
be deleted.
2. Press and hold the SCAN/SAVE key for 3 seconds.
The selected channel is deleted from memory.
To view the channels set in memory, switch to USER mode, as described in
Section 4.16, USER Channel Mode.
Ray101E Handheld VHF Radio
D6713-1