Adding Channels To Memory - Raymarine Ray101 Owner's Handbook Manual

Chapter 4: Operating the Radio

4.14 Adding Channels to Memory

The Ray101 can store any channel except the weather channels. The stored
channels are the ones scanned in the Saved (Memory) Scan mode.
➤
To Add Channels to Memory
1. During normal operation mode, use the UP/DOWN key to select the
desired channel for programming.
2. Press and hold the SCAN/SAVE key for 3 seconds.
The SAVED icon appears to indicate the current channel has been saved in
memory. Any number of channels can be saved as memory channels.
Separate memory channel groups exists for USA, International, and
Canadian frequency sets.
➤
To Delete Channels from Memory
1. During the normal mode, use the UP/DOWN key to select the channel to
be deleted.
2. Press and hold the SCAN/SAVE key for 3 seconds.
The selected channel is deleted from memory.
To view the channels set in memory, switch to USER mode, as described in
Section 4.16, USER Channel Mode.
27
D6704-1