Electrolux ESL 8330RO User Manual page 28

28 www.electrolux.com
6.4 Use of rinse aid and multi-
tablets
When you activate the option Multitab, the
rinse aid dispenser continues to release
rinse aid. However you can deactivate the
rinse aid dispenser. In this case the drying
results may not be satisfactory.
With the rinse aid dispenser deactivated,
the rinse aid indicator is always off.
How to deactivate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
start to flash and the display is blank.
2. Press
• The indicators
• The indicator
• The display shows the current
3. Press
= rinse aid dispenser deactivated.
The rinse aid indicator goes off.
4. Press the on/off button to confirm the
setting.
6.5 MyFavourite
With this option you can set and save the
programme that you use more frequently.
You can only save 1 programme. A new
setting cancels the previous one.
How to save the MyFavourite
programme
1. Set the programme that you want to
save
You can also set applicable options
together with the programme.
, ,
.
,
off.
continues to
flash.
setting: = rinse aid dispenser
activated.
to change the setting.
2. Press and hold
How to set the MyFavourite
programme
Press
6.6 Acoustic signals
and until
Acoustic signals sound when a
malfunction of the appliance occurs. It is
and
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
and go
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
2. Press
3. Press
4. Press the on/off button to confirm the
indicator comes on with fixed light.
.
• The MyFavourite indicator comes
on.
• The display shows the number and
the duration of the programme.
• If options have been saved
together with the programme, the
indicators related to the options
come on.
hold simultaneously
the indicators ,
start to flash and the display is blank.
• The indicators
off.
• The indicator
flash.
• The display shows the current
setting: = Acoustic signal off.
to change the setting.
= Acoustic signal on.
setting.
until the related
and until
, and
, and go
continues to