7-7-3. Device
Select Device to set Spot Out, Enable/Disable CVBS Out, motion zone.
•
ALARM OUT: Set the alarm out duration.
•
DIGITAL DETERRENT: Set the schedule of digital deterrent function and upload the sound file to
DVR.
•
CONTROLLER: Set the controller baud rate and ID.
•
PTZ: Set the PTZ baud rate, protocol, and ID.
•
SPOT: Enable/Disable the SPOT OUT and SEQUENCE.
•
MOTION: Setup the motion detection area and the sensitivity.
SITE: Select the channel
o
MOTION ZONE: FULL Zone or PARTIAL Zone
o
MOTION SENSITIVITY: 1~9 (High sensitivity level)
o
•
KEYTONE: Sets On or Off of Key Tone.
•
REMOTE CONTROLLER ID: Sets an ID number on the supplied remote control for its identification.
•
SENSOR: Select the type of each sensor.
80