Speco D8VS User Manual page 34

4-4-3. Spot Out
Item
SPOT OUT
SPOT TYPE
SPOT ON EVENT
SPOT EVENT
DWELL TIME
SEQUENCE
SEQUENCE
DWELL TIME
SPOT CHANNEL
Figure 4.4.7. SPOT-OUT Setup Screen
Table 4.4.3. Menu Item in SPOT-OUT Setup Screen
Only 1 Spot Out is available to use.
To use the Spot out function on D4VS, Video Resolution has to be
setup as 1280x1024
(Video Resolution Output can be setup in DISPLAY MENU.)
SPOT 1 supports only FULL type. (1 channel only)
Enable/disable channel change if an event occurs on a channel.
Set the dwell time for the display of the event activated channel.
(3-10 sec)
Enable/disable sequential display of spot channel in full screen.
If select ON, the selected channel will be displayed on the monitor
periodically.
Set the dwell time for the spot channel display.(3-10 sec)
Select a channel for spot monitoring using the mouse or the remote
control and press OK button.
Description
34