Installing The Canopy; Installing The Blades - Hunter Beck Installation Manual

1886
Lift the canopy into place so that
the screw holes are aligned.
Put the blade washers, found in the
blade screws, found in the
screws to secure each blade to a blade iron.
Repeat x4
IMPORTANT
NOTE: The blade arms should be mounted with
the ridge facing downward. Installing it incorrectly
could result in your fan not functioning.
7
Ceiling Bracket Downrod

Installing the Canopy

Hunter Pro Tip:
Let the tool do the work!
A magnetic screwdriver will
give you more visibility when
securing the canopy.

Installing the Blades:

hardware bag, onto the
hardware bag. Then install the blade
Ridge
Hanging Fan
Insert the two canopy screws
found in the
Lightly attach the blade arms to the motor with
screws found in the hardware bag, then
securely tighten after both screws are attached.
Repeat x4
Wiring Canopy
hardware bag.
Canopy Screw
bag
bag
bag
bag
Blades Light
x2
x12
Blade Screw
x12
Washer
x12
Blade Arm Screw
Bulb Pull Chain