ICON Health & Fitness NordicTrack T9.5 S User Manual page 16

16. Insert the Tray (31) from the front of the
treadmill as shown, and set it on the Upright
Crossbar (105).
Attach the Tray (31) with four #8 x 1/2" Screws
(1); start all four Screws, and then tighten
them.
17. Note: If the treadmill is assembled on a
smooth surface, it may roll forward during
this step.
Remove the two 5/16" x 3/4" Patch Screws (4)
from the Latch Crossbar (41).
Raise the Frame (56) to the upright position.
Have a second person hold the Frame until
step 19 is completed.
Orient the Latch Crossbar (41) as shown.
Make sure that the "This side toward belt"
sticker (S) is facing the treadmill. Attach
the Latch Crossbar to the brackets (T) on the
Frame (56) with the two 5/16" x 3/4" Patch
Screws (4) that you just removed and two 5/16"
Star Washers (11).
16
1
17
T
11
4
56
16
31
105
1
S
41
T
11
4