Part
249489
COVER, adjust thermostat (OBSOLETE)
131126
• CAP, thermostat, adjusting
131132
• POINTER, thermostat
- - - - - -
• COVER, enclosure, NH-4, adjusting
- - - - - -
• PLATE WITH HOLE, warning, NH-4
- - - - - -
• SCREW, adjusting
249493
• SPRING, adjusting
981000
• SCREW, fillister, 5−40 x 0.25 in., slotted, zinc
Part
106362
THERMOSTAT SERVICE KIT, manual reset
248093
• THERMOSTAT, dual, with bracket
245773
• APPLICATOR, heat conductive paste, 1 cc
Part
106282
SINGLE PASSAGE SEAL SERVICE KIT, heater, NH-4
945017
• O-RING, hotpaint, 3/8-in., tube
945018
• O-RING, hotpaint, 2.734 x 3.00 x 0.139 in.
245773
• APPLICATOR, heat conductive paste, 1 cc
Part
106310
TWIN PASSAGE SEAL SERVICE KIT, heater, NH-4
945023
• O-RING, hotpaint, 1/2-in. tube
945018
• O-RING, hotpaint, 2.734 x 3.00 x 0.139 in.
245773
• APPLICATOR, heat conductive paste, 1 cc
Part
249356
FITTING, 3/8-in. NPTF, with O-ring
- - - - - -
• FITTING, fluid, 3/8-in. NPTF, stainless steel
945017
• O-RING, hotpaint, 3/8-in. tube
© 2023 Nordson Corporation
External Adjust Kit (OBSOLETE)
NOTE:
External adjust can be used on aluminum or stainless steel heaters to allow you
to change the temperature without removing the enclosure cover. An arrow will guide you
in turning the temperature higher or lower.
Description
Manual Reset Thermostat Kit — Japan Only
Description
Standard NH-4 Single Passage Fluid Reservoir Seal Kit
Description
Standard NH-4 Twin Passage Fluid Reservoir Seal Kit
Description
Stainless Steel Alternate Fitting
Description
NH-4 Heaters
63
Quantity
1
1
1
1
1
1
1
1
Quantity
1
1
1
Quantity
1
2
2
1
Quantity
1
2
2
1
Quantity
1
1
1
1602369-05