Table of Contents
Advertisement
Available languages
Available languages
ENGLISH
SHAVING WITH SHAVING GEL
•
Follow the same instructions as dry shaving if using shaving gel.
•
CAUTION After use with shaving gel, please rinse the head and cutters under warm
water to clean away any excess gel and debris.
TRIMMING
•
Push the trimmer button to release the detail trimmer.
•
Hold the trimmer at right angles to your skin.
•
Place the trimmer at desired trim line for a quick, easy, professional trim.
•
To retract the trimmer, push down until it locks into position.
BEARD TRIMMER ATTACHMENT
To fit the beard trimmer attachment:
1.
Switch off your shaver.
2.
Grasp the head and cutter assembly and pull it away from the body of your shaver
(Fig A).
3.
If using, snap the comb to the beard trimming attachment (Fig B).
4.
Align the underside of the beard trimmer attachment with the hexagonal recess in the
shaver body and click it into place (Fig C).
•
Use the trimmer without the comb for trimming hair close to the skin. This will trim hair
to 1mm, holding the blades perpendicular to the skin will trim hair to 0.4mm.
•
Adjust the comb setting by rotating the adjustment dial on top of the comb clockwise
to increase the cut length or anticlockwise to reduce the cut length. The selected
setting is shown on the scale.
TRAVEL LOCK
The Travel Lock feature prevents the shaver from turning on and discharging accidentally
while packed in luggage.
To set the travel lock:
•
Press and hold the on switch for 3 seconds. The shaver will turn on, then will shut off
after the 3 seconds. The LED display will flash five times to indicate the lock is set.
•
While the travel lock is set, if the on switch is pressed, the LED display will flash three
times to indicate the shaver is in travel lock mode.
To Unlock the Travel Lock:
•
Press and hold the on switch for 3 seconds. The LED display will flash three times while
the button is being held and then the shaver will turn on.
TURBO FEATURE
Use the Turbo feature to shave thick stubble. Press the on/off switch once to operate the
shaver at normal speed. Press the on/off switch a second time to operate the shaver in Turbo
mode. When the Turbo feature is activated the LED display will cycle around. To deactivate
press the on off switch once to turn the shaver off.
6
Advertisement
Table of Contents
