HP Compaq dx6100 Series Technical Reference Manual page 169

A.1 Introduction
This appendix lists the error codes and a brief description of the probable cause of the error.
Errors listed in this appendix are applicable only for systems running HP/Compaq BIOS.
Not all errors listed in this appendix may be applicable to a particular system model and/or
configuration.
A.2 Beep/Keyboard LED Codes
Beep and LED indictions listed in Table A-1 apply only to HP-branded models.
Beeps
1 short, 2 long
1 long, 2 short
2 long, 1 short
1 long, 3 short
None
None
None
None
None
NOTES:
[1] PS/2 keyboard only.
Technical Reference Guide
Error Messages and Codes
Table A-1.
Beep/Keyboard LED Codes
LED [1]
NUM lock blinking
CAP lock blinking
Scroll lock blinking
(None)
All three blink in sequence
NUM lock steady on
CAP lock steady on
All three blink together
All three steady on
361834-001
Probable Cause
Base memory failure.
Video/graphics controller failure.
System failure (prior to video initialization).
Boot block executing
Keyboard locked in network mode.
ROMPAQ diskette not present, bad, or drive not ready.
Password prompt.
ROM flash failed.
Successful ROM flash.
A
A-1