Removing The Status-Light Board; Prerequisites; Procedure - Dell Inspiron 14-7466 Service Manual

Removing the status-light board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1 Remove the base
2 Remove the battery.
3 Remove the rear
4 Follow the procedure from step 1 to step 8 in
keyboard assembly".

Procedure

NOTE: The status-light board includes an LED indicator for power and
battery-status light/hard-drive activity light.
1 Open the latch and disconnect the status-light board cable from the status-light
board.
2 Remove the two screws (M2x3) that secure the status-light board to the
computer base.
computer. After working inside your computer, follow
After working inside your
cover.
cover.
computer. For more safety best
www.dell.com/
"Removing the palm rest and
Before
61