Part 3: Installation - Modena WP 7134 WVM User Manual Book

Installation Preparation
•
The installation of dishwasher should be placed be near the
existing water inlet tap and drain outlet and power socket.
•
One side of the sink cabinet should be chosen to facilitate the
connection of drain hoses of the dishwasher.
Power Connection
WARNING!
For personal safety:
•
DO NOT use an extension cord or an adapter plug for this
appliance.
•
DO NOT under any circumstances, cut or remove the
grounding connection from the power cord.
Electrical Requirements
Please look at the rating label to know the rating voltage and connect
the dishwasher to the appropriate power supply. Use the required
fuse 10-amp, time delay fuse or recommended circuit breaker and
provide separate circuit for this appliance only.
Electrical Connection
Ensure the voltage and frequency of the power source match with the
rating plate. Only insert the plug into an electrical socket that properly
grounded. If the electrical socket is not suitable with the appliance's
plug, replace the socket, rather than using an adapter as it could
cause overheating and risk of fire.
Ensure that the grounding is proper before using the dishwasher!

PART 3: INSTALLATION

9