Modena WP 7134 WVM User Manual Book page 11

How to Drain Excess Water
If the sink is 1000 mm higher or more than the floor, the excess water
in hoses cannot be drained directly to the sink. It will be necessary to
drain the excess water from hoses to a bowl or suitable container that
placed outside and is lower than the sink.
Water Outlet
Connect the water drain hose. The drain hose must be installed
properly to avoid water leaks. Ensure that the water drain hose is not
kinked or crushed.
Extension Hose
If you need a drain hose extension, make sure to use a similar drain
hose. It must be no longer than 4 meters, otherwise the cleaning
effect of the dishwasher could be reduced.
Syphon Connection
The waste connection must be at a height less than 100 cm
(maximum) from the bottom of the dish. The water drain hose should
be in a fixed condition.
Positioning the Appliance
Position the appliance in the desired location. The back should stick to
the wall behind it, and the sides to the adjacent cabinets or wall. The
dishwasher is equipped with water inlet hose and drain hose that can
be positioned to the right or the left to facilitate proper installation.
Leveling The Appliance
Once the appliance is positioned
for leveling, the height of the
dishwasher can be adjusted by
rotating the screw level of the
feet. The appliance must not be
skewed more than 2°.
11