Modena WP 7134 WVM User Manual Book page 44

Filling the Rinse Aid and Settings
To fill the rinse aid compartment, open the rinse-aid compartment cap.
Fill the compartment with rinse aid to the MAX level and then close the
cap. Be careful not to overfill the rinse aid compartment and wipe up
any spills. In order to change the rinse aid level, please follow these
steps:
•
Push the programme button and hold it down.
•
Turn on the machine.
•
Hold down the programme button until "rA" disappears from
the display. Rinse aid setting follows water hardness setting.
•
Set the level by pushing the "+" and "-" buttons.
•
Switch off the machine to save the setting.
The factory setting is "4". If the dishes are not drying properly or are
spotted, increase the level. If blue stains form on your dishes,
decrease level.
44