Modena WP 7134 WVM User Manual Book page 12

Freestanding Installation
The height of the dishwasher is 845
mm. It has been designed to fit the
machine between
cabinets of the same height in modern
kitchen cabinet. The feet can be
adjusted so the desired height is
reached. The laminated top of the
machine does
maintenance since it is heatproof,
scratch proof and stain proof.
Underneath The Existing Worktop
(When fitting beneath a worktop) In most
modern fitted kitchens there is a single
worktop cabinet in which an electrical
appliance can be fitted there. In this case,
remove the worktop of the dishwasher by
unscrewing the screws on the top rear side
(a).
ATTENTION!
After removing the top, the screws must be installed again on
the top edge of the rear side (b).
The height will then be reduced to 815 mm, according to the
International Regulations (ISO) and the dishwasher will fit
perfectly under the kitchen working top
the existing
not require any
12