Advertisement
Clock / Sleep Timer
Setting the Clock
Press and hold the power o mode Preset/Clock
1.
button until the
2.
Press the Hour and Minute buttons to adjust the
time. The PM indicator will light when the hour is set
in the PM.
3.
Press the Preset/Clock
Setting the Sleep Timer
1.
Power on the radio on press the Snooze button to adjust
the timer ( 90, 80, 70, 60, 50, 40, 30, 20, 10 min or OFF ).
2.
Once the set sleep time has expired the clock radio will
Alarm
Setting the Alarm
AL1 or AL2 buttons to set Alarm
1.
1 or Alarm 2.
2.
Hour and Minute buttons to set
the desired time. Note the PM indicator.
3.
Press the AL1 or AL2 buttons repeatedly to switch
between Radio , Buzzer or o , when you set the alarm
to Radio or Buzzer the LED will be on correspondingly.
Wait for the display to stop ashing.
4.
Once the set alarm time is reached, the alarm will
sound. Press the Power
until the set alarm time is reached again.
5.
To set the other alarm, follow the above steps and
choose the alarm not currently set.
Snooze and Alarm Reset
After the alarm sounds:
Press the Snooze button to delay the alarm for an
•
additional 9 minutes.
Press the Power button to turn the alarm o unit the
•
set alarm time is reached again.
OR
Radio
Radio Reception
Adjust the position of the FM Antenna to improve FM radio
reception. An AM antenna is built into the clock radio. To
improve AM radio reception, adjust the position of the clock
radio.
Tuning the AM or FM Radio
1.
Power on the radio and press the Power button again
to switch between the AM and FM radio mode.
Press the Tuning ±
2.
frequency.
3.
Press the Volume ± buttons to adjust the volume of
the radio.
Saving a Station as a Preset
1.
With the radio on, tune to your desired frequency,
press and hold the Preset/Clock button until the
Press the Tuning ± buttons to choose the desired
2.
preset station, 1 to 20 .
Press the Preset/Clock button again to set the
3.
frequency to that preset station.
4.
The unit will store 10 FM and 10 AM radio station
presets. Once set, press the Preset/Clock button to
cycle through
your preset stations.
4
Advertisement
