Playing Am/Fm Radio; Setting/Cancelling Alarm - Sylvania SCR1206B-PL Instruction Manual

PLAYING AM/FM RADIO

1. Press the POWER, AL OFF & SOURCE BUTTON to turn the clock radio on
2. Press the POWER, AL OFF & SOURCE BUTTON again to switch between the AM and
FM radio mode.
3. Press TUNING DOWN & HOUR BUTTON and TUNING UP & MINUTE BUTTON to
adjust the radio to desired frequency.
4. Press and hold the TUNING DOWN & HOUR BUTTON and TUNING UP & MINUTE
BUTTON to search for the next available frequency.
5. Press and hold the POWER, AL OFF & SOURCE BUTTON to turn the clock radio off.
Saving a Station as Preset
1. Follow the instructions for Tuning the AM or FM Radio.
2. Tune to the desired station
3. Press and hold the MEMORY & CLOCK SET BUTTON to save the current radio station
as a preset.
4. Press TUNING DOWN & HOUR BUTTON and TUNING UP & MINUTE BUTTON to
select the preset slot.
Tuning to a Preset Radio Station
1. Follow the instructions for Tuning the radio and saving a station as a preset.
2. Press the MEMORY & CLOCK SET BUTTON then Press TUNING DOWN & HOUR
BUTTON and TUNING UP & MINUTE BUTTON to select the preset slot to recall preset
radio stations.
Notes:
* Adjust the posistion of the FM antenna to improve FM Radio reception.
* An AM antenna is built into the clock radio. To improve AM radio reception, adjust the
position of the clock radio.
ALARM
Setting the Alarm
1. If in radio mode, press and hold the POWER, AL OFF & SOURCE BUTTON to turn the
unit off.
2. Press the VOLUME DOWN & ALARM ONE BUTTON or VOLUME UP & ALARM
TWO BUTTON.
3. Press the TUNING UP & HOUR BUTTON to adjust the hour.
*The PM indicator will light when the hour is set in the PM
4. Press the TUNING DOWN & MINUTE BUTTON to adjust the minute.
*The Alarm One or Alarm Two indicator will come on.
5. Press the VOLUME DOWN & ALARM ONE BUTTON or VOLUME UP & ALARM
TWO BUTTON repeatedly to switch between Radio (AM/FM), Buzzer (bb) or Off.
*If the alarm is set to Radio, use the VOLUME DOWN & ALARM ONE BUTTON or
VOLUME UP & ALARM TWO BUTTON to adjust the volume of the alarm.
6. Once the set alarm time is reached, the alarm will sound.
7. To set the other alarm, follow the above steps and choose the alarm not currently set.
Cancelling the Alarm
1. Follow the insurtcions for Setting the Alarm.
2. Press the VOLUME DOWN & ALARM ONE BUTTON or VOLUME UP & ALARM
TWO BUTTON repeatedly until the display show "OFF" and indicator will no longer lit.
When the Alarm sounds
Press SNOOZE, SLEEP & DIMMER BUTTON to delay for an additional 9 minntes.
Press POWER, AL OFF & SOURCE BUTTON to turn the alarm off until the set alarm time
is reached again.
6