DN
DN
EMU28063
Shallow water
EMU32872
Power trim and tilt models
The outboard motor can be tilted up partially
to allow operation in shallow water.
ECM01491
NOTICE
If the engine speed is suddenly in-
creased when the outboard motor is
partially tilted up, the power trim and tilt
unit could be damaged.
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit
is above the surface of the water when
ZMU04196
setting up for and cruising in shallow
water. Otherwise severe damage from
overheating can result.
EMU32923
Procedure for power trim and tilt models
1.
Place the remote control lever in neutral.
ZMU04603
2.
Slightly tilt the outboard motor up to the
desired position using the power trim
and tilt switch. WARNING! Using the
power trim and tilt switch on the bot-
tom cowling while the boat is moving
or engine is on could increase the risk
of falling overboard and could distract
the operator, increasing the risk of
collision with another boat or an ob-
stacle.
Operation
N
[EWM01851]
ZMU04588
55