Cisco 500 Series Quick Reference Manual page 3

Cisco Headset 561 and Cisco Headset 562 with Multi-Base
For Cisco IP Phone 8800 Series on Cisco Unified Communications Manager
Power/Call
Mute
Volume +/-
High Sound Pressure—Avoid listening to high volume levels for long periods to prevent
possible hearing damage.
When you plug in your headset, lower the volume of the headset speaker before you put
the headset on. If you remember to lower the volume before you take the headset off, the
volume will start lower when you plug in your headset again.
Be aware of your surroundings. When you use your headset, it may block out important
external sounds, particularly in emergencies or in noisy environments. Don't use the
headset while driving. Don't leave your headset or headset cables in an area where
people or pets can trip over them. Always supervise children who are near your headset
or headset cables.
Headset LED status indication
Incoming Call
Active Call
Headset paired with dock
Headset and dock not paired
Base LED status indication
Battery strength
System update
Headset and dock not paired
Sources Source Call Status
Mobile Incomming Call
Computer Active Call
Deskphone Muted Call
Quick Reference Guide
Blinking red
Steady red
White LED blinking every 4 seconds
White LED blinking rapidly
LEDs show solid as battery charges
LEDs blink in squence left to right.
All LEDs blinking
Blinking Green
Steady Green
Steady Red