1. Manuals
  2. Brands
  3. COP-USA Manuals
  4. DVR
  5. NVR2816NE-L
  6. User manual

COP-USA NVR2816NE-L User Manual

H.264 16-channel network video recorder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
NVR User Manual
For H.264 16-channel network video recorder
All rights reserved

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NVR2816NE-L and is the answer not in the manual?

Questions and answers

Related Manuals for COP-USA NVR2816NE-L

Summary of Contents for COP-USA NVR2816NE-L

  • Page 1 NVR User Manual For H.264 16-channel network video recorder All rights reserved...
  • Page 2 NVR User Manual CAUTION Please read this user manual carefully to ensure that you can use the device correctly and safely.  We do not warrant all the content is correct. The contents of this manual are subject to change without notice. ...

  • Page 3: Table Of Contents

    NVR User Manual Table of Contents 1 Introduction............................... 1 1.1 NVR Introduction ................................1 1.2 Main Features .................................. 1 2 Hardware Installation ..........................4 2.1 Install Hard Drive &DVD Writer ............................4 2.1.1 Install Hard Drive ....................................4 2.1.2 Install DVD Writer ....................................5 2.2 Front Panel Descriptions ..............................
  • Page 4 NVR User Manual 5.2 Live Configuration................................21 5.2.1 Live ........................................21 5.2.2 Main Monitor ......................................22 5.2.3 Mask ........................................22 5.3 Record Configuration ..............................23 5.3.1 Enable ........................................23 5.3.2 Record Bitrate ....................................... 23 5.3.3 Time ........................................24 5.3.4 Stamp ........................................25 5.3.5 Recycle Record ......................................
  • Page 5 NVR User Manual 5.8.3 Block/Allow list ...................................... 37 6 Search, Playback & Backup ........................38 6.1 Time Search................................... 38 6.2 Event Search ................................. 39 6.3 File Management ................................40 6.4 Backup ................................... 41 7 Manage NVR ............................42 7.1 Check System Information ............................. 42 7.1.1 System Information ....................................
  • Page 6 NVR User Manual 8.4.2 Remote Backup ..................................... 58 8.5 Remote System Configuration ............................59 8.6 Tools ....................................60 8.7 Remote Information ..............................61 9 Mobile Surveillance ..........................62 9.1 By phones with Iphone OS ............................62 9.2 By phones with Android OS ............................69 Appendix A FAQ ............................

  • Page 7: Introduction

    NVR User Manual 1 Introduction 1.1 NVR Introduction This model NVR (Network Video Recorder) is designed specially for CCTV system. It adopts high performance video processing chips and embedded Linux system. Meanwhile, it utilizes many most advanced technologies, such as standard H.264 with low bit rate, Dual stream, SATA interface, VGA output mouse supported, IE browser supported with full remote control, mobile view(by phones), etc., which ensure its powerful functions and high stability.
  • Page 8 NVR User Manual RECORD & PLAYBACK  Record modes: Manual, Schedule, Motion detection and Sensor alarm recording  Support recycle after HDD full  Support 1080P/720P/VGA recording  Resolution, frame rate and picture quality are adjustable  Two record search mode: time search and event search. ...
  • Page 9 NVR User Manual  Support remote time and event search, and channel playback with picture snap  Support remote full menu setup, changing all the NVR parameters remotely  Support mobile surveillance by smart phones , symbian, WinCE, Iphone or Gphone, 3G network available ...

  • Page 10: Hardware Installation

    NVR User Manual 2 Hardware Installation Notice: Check the unit and the accessories after getting the NVR. Please don‟t power up the unit till the physical installation is complete. 2.1 Install Hard Drive &DVD Writer 2.1.1 Install Hard Drive Notice: 1. This series supports two SATA hard drives. Please use the hard drive the manufacturers recommend specially for security and safe field.

  • Page 11: Install Dvd Writer

    NVR User Manual 2.1.2 Install DVD Writer Notice: 1. The writers must be the compatible devices we recommend. Please refer to “Appendix C Compatible Devices” 2. This device is only for backup. Step1: Unscrew and Open the top cover. Step2: Connect the power and data cables. Place the DVD writer onto the bottom case as Fig 2-3. Step3: Screw the DVD writer as Fig 2-4.

  • Page 12: Rear Panel Instructions

    NVR User Manual Item Type Name Description The light turns blue when recording MENU/+ 1. Enter menu in live 2. Increase the value in setup BACKUP/- 1. Decrease the value in setup 2. Enter backup mode in live RECORD/FOCUS 1. Record manually 2. FOCUS function enables at PTZ mode. REW/SPEED 1.
  • Page 13 NVR User Manual Fig 2-5 Rear Panel for 16-ch Item Name Description DC12V Power input Alarm Out Relay Output. Connect to external alarm. Alarm Inputs for connecting sensors Alarm in Connect to Keyboard, K is TX+, B is TX- Connect to speed dome (unavailable) Audio in 1 CH audio input HDMI port...

  • Page 14: Remote Controller

    NVR User Manual 2.4 Remote Controller It uses two AAA size batteries.  Open the battery cover of the Remote Controller.  Place batteries. Please take care of the polarity (+ and -).  Replace the battery cover. Fig 2-6 Remote Controller Button Function Switch off—to stop DVR.
  • Page 15 NVR User Manual Enter Button To confirm the choice or setup Menu Button To enter into menu Exit Button To exit the current interface Focus/IRIS/Zoom/PTZ To control PTZ camera. Move camera/zoom/IRIS/Focus Preset Button Unavailable Cruise Button Unavailable Track Button Unavailable Wiper Button Unavailable Light Button...

  • Page 16: Control With Mouse

    NVR User Manual The default device ID of the NVR is 0. It‟s not necessary to reset the device ID when a remote is to be used to control a single NVR. However when controlling multiple NVRs with multiple remote controllers, you would need to configure the device ID, please refer to below steps: ...
  • Page 17 NVR User Manual supports digits, alphabets and symbols as inputs. Click Shift button to input Capital letters and symbols; click Shift button again to return. Fig 2-7 Digital Numbers and Letters Input Window You can change some values using the mouse wheel, such as time. Move cursor onto the value and roll the wheel when the value blinks.

  • Page 18: Basic Function Instruction

    NVR User Manual 3 Basic Function Instruction 3.1 Startup and Shutdown Please make sure all the connections are done properly before you power on the unit. Proper startup and shutdown are crucial to expanding the life of your NVR. 3.1.1 Startup Step1: Connect with the source power.

  • Page 19: Login

    NVR User Manual Step1: Enter into Menu and select “Shut Down” icon. This will take you to a shutdown window. Step2: Click OK. Then the unit will power off after a while. Step3: Disconnect the power. 3.2 Login You can login or log off the NVR system. Once logged off you cannot do any other operation except changing the multi-screen display.

  • Page 20: Live Playback

    NVR User Manual Symbol Meaning Green Manual record Yellow Motion detection record Sensor Alarm record Blue Schedule record Fig 3-2 Live Preview Interface 3.3.1 Live playback Click Play button to playback the record. Refer to Figure3-3. You can do complete operation by clicking the buttons on screen.
  • Page 21 NVR User Manual Fig 3-3 Live Playback...

  • Page 22: Add Ip Cameras

    NVR User Manual 4 Add IP Cameras This chapter mainly introduce how to connect multiple IP cameras through NVR. Once you finish adding IP cameras, you can see the live images through the monitor of NVR. To add IP cameras: Step 1: Please Enter into MenuIP Camera tab.
  • Page 23 NVR User Manual Fig 4-3 Add Device Note: If IP cameras and NVR are in LAN, their IP address must be in the same network segment. For example: If the IP address of NVR is 192.168.006.067, the IP address of IP camera must be 192.168.006.XXX. If the NVR is connected through PPPoE, the IP camera can be connect through PPPoE.

  • Page 24: Main Menu Setup Guide

    NVR User Manual 5 Main Menu Setup Guide Click right mouse or press ESC button on the front pane to display the main menu toolbar on the bottom of the screen. Refer to Fig 5-1: Fig 5-1 Main Menu Toolbar Click the icon beside the screen mode to display a channel select dialog.

  • Page 25: Basic Configuration

    NVR User Manual Fig 5-2 System Setup 5.1 Basic configuration Basic configuration includes three sub menus: system, date & time and DST. 5.1.1 System Step1: Enter into MenuSetupBasicSystem. Refer to Fig 5-3: Step2: In this interface you can setup the device name, device ID, video format, max network user, VGA resolution and language.

  • Page 26: Date & Time

    NVR User Manual Show System Time: If selected, displays the current time during live monitoring. Max Online Users: To set the maximum number of concurrent user logins in the NVR. Show wizard: If selected, the GUI would launch the startup wizard on every boot, allowing the to do basic setup. Video Output: Resolution of live display interface, ranges from: VGA800*600, VGA1024*768, VGA1280*1024,CVBS and HDMI.

  • Page 27: Live Configuration

    NVR User Manual 5.2 Live Configuration Live configuration includes three submenus: live, main monitor and mask. 5.2.1 Live In this interface, you can setup camera name, adjust colors including brightness, hue, saturation and contrast. Step1: Enter into MenuSetupLive interface. Refer to Fig 5-6: Note: A soft keyboard will pop up by clicking the camera name.

  • Page 28: Main Monitor

    NVR User Manual 5.2.2 Main Monitor Step1: Enter into MenuSetupLiveMain Monitor tab. Refer to Fig 5-8: Step2: Select split mode: 1× 1、 2× 2、 2× 3、 3× 3、 4× 4 and channel. Click button to setup the previous channel group. Click button to set the latter channel group.

  • Page 29: Record Configuration

    NVR User Manual 5.3 Record Configuration Record configuration includes five sub menus: enable, record bit rate, time, stamp and recycle record. 5.3.1 Enable Step1: Enter into MenuSetupRecordEnable tab. Refer to Fig 5-10: Parameter Meaning Record To enable/disable recording for the channel Audio enable/disable audio...

  • Page 30: Time

    NVR User Manual Parameter Meaning Rate Range from: 1-30（NTSC）1-25(PAL) Resolution Supports 1080P, 720P, VGA Quality Unavailable Encode Max bit Ranges from 256 ~12288 kbps stream Fig 5-11 Record Configuration-Record Bit rate 5.3.3 Time Step1: Enter into MenuSetupRecordTime interface. Refer to Fig 5-12: Pre-alarm record time: The record time prior to actual triggering of an alarm i.e.

  • Page 31: Stamp

    NVR User Manual 5.3.4 Stamp Stamp：This provides an option to enable or disable the Camera Name and the Time stamp on the video. You can also choose a position for the stamp on the screen. Step1: Enter into MenuSetupRecordStamp interface. Refer to Fig 5-13: Step2: Checkmark camera name and time stamp;...

  • Page 32: Schedule Configuration

    NVR User Manual 5.4 Schedule Configuration Schedule configuration includes three sub menus: schedule, motion and alarm. 5.4.1 Schedule This tab allows defining schedule for normal recording for seven days of a week, 24 hours of a day. Every row denotes an hourly timeline for a day.

  • Page 33: Motion

    NVR User Manual 5.4.2 Motion This tab allows to setup schedule for motion based recording. Step1: Enter into MenuSetupScheduleMotion tab. Refer to Fig 5-16: Step2: The setup steps for schedule for motion based recording are similar to normal schedule setup. You can refer to 5.4.1 Schedule for details. Note: The default schedule of motion based recording is 24x7, that is, the color of schedule settings interface is dark blue.

  • Page 34: Sensor Alarm

    NVR User Manual 5.5.1 Sensor Alarm Sensor includes three sub menus: basic, alarm handling and schedule. Operate the following steps to configure sensor alarm: Step1: Enter into MenuSetupAlarmSensorBasic interface. Refer to Fig 5-18: Step2: Enable channels by checking the checkboxes beside the desired channels .

  • Page 35: Motion Alarm

    NVR User Manual Step 6: Enter into alarm tab to select the options to handle alarm. Buzzer: If selected, the local buzzer would be activated on an alarm. Full screen alarm: If selected, there will pop up the chosen channel on the monitor on an alarm trigger.
  • Page 36 NVR User Manual Step3: The setup steps of motion trigger are similar to „Alarm Handling‟. You can refer to Chapter 5.5.1 Sensor Alarm Handling for more details. Step4: Click “Setting” button under the Area to display the following picture as shown in Fig 5-23: Step5: In the Area tab, you can drag slide bar to set the sensitivity value (1-8).

  • Page 37: Other Alarm

    NVR User Manual 5.5.3 Other alarm This tab gives a choice to configure alarm for Disk Full, IP Conflict, the Disconnect event or Disk Attenuation. Step1: Enter into MenuSetupAlarmOther Alarm interface. Refer to Fig 5-25: Step 2: Use the dropdown menu and select the event or the alarm. Step 3: Check the required trigger options.

  • Page 38: Network Configuration

    NVR User Manual It is an inbuilt alarm output device. To setup Buzzer: Step1: Enter into MenuSetupAlarm out Buzzer tab; Step2: Checkmark Buzzer and set buzzer alarm hold time. This would trigger the buzzer when the system is in alarm. 5.6 Network Configuration Network configuration includes three submenus: network, Email and other settings.

  • Page 39: Email

    NVR User Manual 5.6.2 Email Step 1: Enter into MenuSetupNetworkEmail tab. Refer to Fig 5-28: SMTP Server/Port: The name and port number of SMTP server. Check the SSL checkbox if the server requires a secure connection (SSL); user can setup mail servers (such as Gmail) as required. Send address/password: Sender‟s email address/password Receive address: Receiver‟s email address.
  • Page 40 NVR User Manual How to apply for a domain name?  Here we take www.dyndns.com for example. Step 1: Input www.dyndns.com in the IE address bar. Click ”Free Trial of DynDNS Pro””Start the trial” to register. Step 2: Input hostname, select service type and input your IP address. The picture is shown as follows: Step 3: Click “Add to cart”.

  • Page 41: User Management Configuration

    NVR User Manual Click” Create Account” button to create user account. After that, you shall provide your card number, card expiration and security code as well as billing address. Finally click “sign up for trial” button. Now, according to the domain name registration of “DDNS”，the domain name for NVR is “abc.dyndns.tv”, username is “bcd” and password is “123456”...
  • Page 42 NVR User Manual Step 4: Click „OK‟ button to save settings. Note: When the default value of binding PC MAC address is 0, the user is not bound with the specified computer. If the bind option is used, the user would be able to log into the NVR only through the specific computer (carrying the MAC address). Fig 5-30 User Management Configuration Fig 5-31 Add-General Step 5: Select Authority tab and then assign the operation rights for particular user.

  • Page 43: Advanced

    NVR User Manual 5.8 Advanced Advanced configuration includes three submenus: Reset, Import/Export and Block/Allow list. 5.8.1 Reset This would reset the system to factory defaults and reboot the NVR. 5.8.2 Import/Export User can export the data files into mobile storage devices as backup and can also import specified data files from mobile storage device to NVR.

  • Page 44: Search, Playback & Backup

    NVR User Manual 6 Search, Playback & Backup Search configuration includes three submenus: time search, event search and file management. 6.1 Time Search Step1: Enter into MenuSearch Time search tab. Refer to Fig 6-1: Fig 6-1 Search Configuration-Time Search Step2: Select date and channels on the right hand side and press “Search” button. A date with highlighted borderline indicates presence of data.

  • Page 45: Event Search

    NVR User Manual Playback Buttons Note: When the monitor resolution is set to VGA800*600, part of the time search interface will be hidden. Click the “Expand to” button to expand the whole interface. 6.2 Event Search Step1: Enter into MenuSearchEvent Search tab. Refer to Fig 6-2: Fig 6-2 Search Configuration-Event Search...

  • Page 46: File Management

    NVR User Manual Step 2: Select date and channels on the right hand side. A data with highlighted borderline indicates presence of data. Step 3: Then checkmark Motion, Sensor or All accordingly. You can search for motion based recording and sensor based recording.

  • Page 47: Backup

    NVR User Manual Step 4: Use “All” button to lock/unlock or delete all files in the file management column. Step 5: Double click an unlocked item to playback. 6.4 Backup This unit supports backup by built-in SATA DVD Writer or USB flash drive. User also can make backup by IE browser via internet. Refer to 7.3.2 Remote backup.

  • Page 48: Manage Nvr

    NVR User Manual 7 Manage NVR 7.1 Check System Information Check system information includes five submenus: system, event, log, network and online user. 7.1.1 System nformation In this interface, user can check the hardware version, MCU version, kernel version, device ID, etc. 7.1.2 Event nformation In this tab, you can search for events like motion, sensor and video loss.

  • Page 49: Manual Alarm

    NVR User Manual Refresh: refresh the current interface. Disconnect: Disconnect the online users to access NVR. If this function is used by the admin, the particular PC will not be able to access the device for five minutes. 7.2 Manual Alarm In this interface, user can trigger a manual alarm.

  • Page 50: Logoff

    NVR User Manual Step 1: Copy the upgrade software which gets from vendor into the USB storage device. Step 2: Connect the USB flash drive to the USB port. Step 3: Enter MenuUpgrade tab. Then the upgrade software name would be displayed in the upgrade list box. Step 4: Select that software and then click upgrade button.

  • Page 51: Remote Surveillance

    NVR User Manual 8 Remote Surveillance 8.1 IE Remote Surveillance In order to view the NVR from a network it must be connected to a LAN/WAN or internet. The network setup should be done accordingly. Please refer to 5.6 Network Setup. This NVR supports IE browser, on Windows XP and Vista platform. 8.1.1 On LAN Step 1: Enter into the NVR‟s Main MenuSetupNetwork tab to input IP address, Subnet Mask, etc .If using DHCP, please enable DHCP in both the NVR and the router.
  • Page 52 NVR User Manual Step 3: Open IE browser, input IP address, or dynamic domain name and enter. If HTTP port is not 80, add the port number after IP address or domain name. Step 4: IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input name and password correctly, and enter to view.

  • Page 53: Remote Surveillance Through Apple Pc

    NVR User Manual Step 3: If users want to utilize dynamic domain name, please apply for a domain name in a DNS server supported by the NVR or router. Then add to the NVR or router. Step 4: The following setting steps are as the same as Step3 and Step 4 in Point 1. 8.2 Remote Surveillance through Apple PC Note: Because the current plug-in version of client end just only supports 32-bit mode, so the safari browser shall start 32-bit mode.

  • Page 54: On Lan

    NVR User Manual 8.2.1 On LAN Step 1: After starting Apple computer, click Apple icon. The following window will pop up. Please select “System Preferences””Internet &Wireless”click “Network” . Step 2: Enter into Network interface and then click “Ethernet Connected” to check the internet connection of Apple PC.
  • Page 55 NVR User Manual Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the NVR‟s Main MenuSetupNetwork interface to manually input IP address, Subnet Mask and Gateway according to the configuration of PC. The network segment should be the same as the PC.

  • Page 56: On Wan

    NVR User Manual button，the following window will pop up： Input the name and password of Apple PC and then click “OK” to install this Active X control. Step 6: After finishing installing the Active X control, please quit from the Safari browser. Right click Safari icon on the desktop and then select “Quit”...

  • Page 57: Remote Preview

    NVR User Manual 8.3 Remote Preview Fig 8-2 Remote Live Preview Symbol and function Definitions: Channel indicator Screen display mode Volume ① ② ③ Snap Start manual record Start IE record ④ ⑤ ⑥ Start Talk Playback Color ⑦ ⑧ ⑨...
  • Page 58 NVR User Manual Screen display mode: Click the icon beside the screen display mode, channel select dialog will appear as below: Take 8-channel view for example: user can checkmark 8 channels form 1-ch to 16-ch at random to display the live pictures, A maximum of 16 channels can be selected.

  • Page 59: Remote Playback & Backup

    NVR User Manual Fig 8-4 Right Key Sub Menu Stream: The NVR supports master stream and sub stream. Master stream has higher frame rate, max 25 fps (PAL)/30 fps (NTSC ） for every channel, but it needs higher network bandwidth; second stream has low frame rate, max 6FPS (PAL)/7FPS(NTSC) for every channel, but it requires low network bandwidth as compared to the master stream.
  • Page 60 NVR User Manual Fig 8-5 Play Record File Interface This NVR supports remote time search, event search and file management. By Time Search: Step1: Enter into SearchTime search. Refer to Fig 8-6:...
  • Page 61 NVR User Manual Fig 8-6 Time Search Interface Step2: The highlight date in the area② indicates recorded data. Select the date in the area ② and record channels in area③. Step3: Click “Search” button. The record data will be displayed in the data information list box. Step 4: Set the Start time and display mode in the area①...
  • Page 62 NVR User Manual Fig 8-7 Time Search Playback By Event Search:...
  • Page 63 NVR User Manual Step1: Enter into SearchEvent Search. Refer to Fig 8-8: Fig 8-8 Event Search Interface Step 2: Click the highlight date and select record channels. Step 3: Checkmark the event type: motion and sensor. Step 4: The events will be display in the event list box by clicking Search button. Step 5: Double-click certain item to playback.

  • Page 64: Remote Backup

    NVR User Manual Fig 8-9 File Management Interface Lock: Select certain file item in the file list box and then click “Lock” button to lock this file that ca not be deleted or overlaid. Unlock: Select a locked file and then click “unlock” button to unlock this file. Delete: Select an unlock file and then click “delete”...

  • Page 65: Remote System Configuration

    NVR User Manual Fig 8-10 Remote Backup Interface Step1: Select channels, set the start and end time and then click “search‟ button to display the file information in the file list box Step2: Select backup files and click “browse” button to set the path. Then click “backup” button to start backup. The backup files will be saved on user‟s PC.

  • Page 66: Tools

    NVR User Manual Fig 8-11 Remote System Configuration The sub menu list and the options in every menu are similar to that of the NVR. Please refer to Chapter 5 Main Menu Setup Guide for more details. 8.6 Tools Click on tool‟s tab to access the disk management tool. You can view the status of the HDD, change/view the read/write properties and can also format the HDD remotely.

  • Page 67: Remote Information

    NVR User Manual 8.7 Remote Information The Info tab provides a web based interface to access the general information pertaining to the NVR‟s settings. It includes five submenus: System, Event, Log, Network and Online users. The sub menu list and the options in every menu are similar to that of the NVR.

  • Page 68: Mobile Surveillance

    NVR User Manual 9 Mobile Surveillance This NVR supports mobile surveillance by phones with android, Iphone OS. If you want to make mobile surveillance, please enable network service on the NVR first and refer to Chapter 5.6 Network configuration. The below is the use instructions on mobile client end for two OS.
  • Page 69 NVR User Manual Step 4: Input iTunes Store password and then click “OK”. The software will be installed automatically. Note: If it is the first time for user to operate, please enter user ID; if there is no Store account, user needs to apply for one.
  • Page 70 NVR User Manual 2. Install through PC. Step 1: Install iTunes store in PC and then login. Step 2: Connect iPhone and PC. Step 3: Enable “search” function to search “Superlive-Pro”. Step 4: Click “free application” button.
  • Page 71 NVR User Manual Step 5: Input apple ID and password, then click “acquire”. Step 6: Checkmark “synchronously apply program” and “Superlive-pro”, and then click “apply” button . Operation Instruction for Superlive-Pro Login interface Enter server‟s IP address (or domain name), user name and password Click “Remember server”...
  • Page 72 NVR User Manual Main Interface Image view Four channel Playback Snap Setting Record Information view Audio Server list Talk Logoff Color Single channel Image View After the image is snapped, you can click icon to enter into the image view interface. Select the image and click it to amplify this image.
  • Page 73 NVR User Manual Playback Click icon to enter into the playback interface. Then click „Search‟ button, select the time and channel to playback and click button. Now you can see the local file list. Select a file and click play button to playback. You can also copy or delete the file. Finally, click „Close‟...
  • Page 74 NVR User Manual Configuration interface Click icon to enter into Settings interface. You can set many properties, such as local, basic, live, record, schedule, alarm, network, etc. Please see chapter 5 in respect of setting steps for more details. Information View Interface Click icon to enter into information view interface.

  • Page 75: By Phones With Android Os

    NVR User Manual 9.2 By phones with Android OS Software Installation Step 1: Run Google Market program. Step 2: Search”Supercam”. Step 3: Press “Install” button. Step 4: Click “OK” button.
  • Page 76 NVR User Manual Step 5: User can view the download and install process in notifications; Once finishing downloading, the software will install automatically. Login Enter into server‟s IP address (or domain name), user‟s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password.
  • Page 77 NVR User Manual playback image view 【Playback】 【Image】 record file log record device list 【Log】 【Server List】 【Live】 live view 【Settings】 software setting device 【Help】 software help Information】 information center view logoff and return to login interface 【Logoff】 Live view Stop playing Single channel display Screen mode...
  • Page 78 NVR User Manual The first picture The previous picture Next picture The last picture Zoom in Zoom out Delete Record playback...
  • Page 79 NVR User Manual Play/Pause Stop Fast forward Slow play Click Playback icon in the Main Menu interface to enter into the playback interface. First, choose channel. Second, select the record file and click it to playback. Finally, click „Return‟ button to return to the previous interface. Server list Add a server list Modify a server list...
  • Page 80 NVR User Manual Audio alarm enabled, when Video Loss/Sensor/Motion happen ， sound alarm will be Alarm setting triggered; If shake Alarm is enabled, when Video Loss/Sensor/Motion happen ， shake alarm will be triggered. Storage User can setup the relevant parameters of mobile setting video.

  • Page 81: Appendix A Faq

    NVR User Manual Appendix A FAQ Q1. Why the NVR doesn’t turn on even after connecting to the power? a. The power adapter could have gone bad. Please change a new power adapter. b. The power from the adapter may be not enough for operating the NVR. Please use the power adaptor supplied along with the NVR.
  • Page 82 NVR User Manual c. The HDD could have gone bad. Change a new one. Q6. The system cannot record. a. Make sure the HDD was formatted prior to use. b. Maybe the user hasn‟t enabled the record function or has done incorrect setup. Please refer to Chapter 5. c.
  • Page 83 NVR User Manual ② select Security------Custom Level….Refer to Fig 8-1. ③ Enable all the sub options under “ActiveX controls and plug-ins”. Refer to Fig 8-2. ④ Then click ok to finish setup. b. Other plug-ins or anti-virus may block ActiveX. Please disable or do the required settings. Fig 8-1 Fig 8-2 Q9: NVR displays “please wait…”all the time.
  • Page 84 NVR User Manual Q10: How to input password and numbers in the interface? Click the password or the input box a small keyboard will pop up. Please select characters to be input (the initial password is 123456), or you can use the digital keys on the front panel, or the digital keys on the remote controller. Q11: A hard disk is being identified as a new device however it was being used with another NVR of same model.
  • Page 85 NVR User Manual PC Module Parameters Intel Core(TM)2 Duo CPU E4600 Motherboard G31/P31 chip GMA3100/NVIDIA GeForce 8400/ ATI RADEON HD3450 Windows 2000(SP4 above) /Windows XP(SP2 above) VISTA DirectX Q14: How to handle the situation that the codec Control is blocked when downloading in the VISTA or Win7 system? This problem can be fixed in two ways: Enter Control PanelUser Account and Family Safety ...
  • Page 86 NVR User Manual Q15. How to play the backup file? Insert your USB device where the backup files are saved in the USB port of PC. If your files are saved in NVR format, you must have already downloaded the backup player box before doing backup. Then double click to open your USB disk to find your backup files and backup player.

  • Page 87: Appendix B Calculate Recording Capacity

    NVR User Manual Appendix B Calculate Recording Capacity You can calculate the size of hard disk according to the saving time and NVR recording settings. The NVR uses fixed video bit rate. The below are the details at different settings. The used space (MB/H) = Bitrate ÷ 8× 3600 ÷ 1024. Bit Rate Used Resolution...

  • Page 88: Appendix C Compatible Devices

    NVR User Manual Appendix C Compatible Devices Compatible USB drive after test. Brand Capacity 512MB, 1G, 2GB Netac Kingston Aigo Smatter vider SanDisk 2. Compatible SATA CD/DVD writers after test Brand Model TECLAST GH22NP20/TL-22XD BENQ DW220S-0K4 LITEON DH—20A6S01C LITEON DH-20A4P02C SAMSUNG TS-H653B...
  • Page 89 NVR User Manual 3. Compatible HDD list Brand Capacity Seagate Barracuda 80G/160G/250G/320G /1.5T/2TB Seagate SV35.3 Seagate Pipeline HD.2 500G Maxtor Diamondmax 160G HITACHI Deskstar 80G/160G WD WD1600JS 160G Samsung HD161HJ 160G...

  • Page 90: Appendix D Specifications

    NVR User Manual Appendix D Specifications Compression format H.264 Main Profile Composite：1.0V p-p/75Ω BNC× 1, VGAX1, HDMI× 1 Video output HDMI/VGA Resolution 1920*1080/1280*1024 /1024*768/ 800*600 Record Resolution 1080P/720P/VGA Display Frame Rate 100fps/200fps/400fps (PAL); 120fps/240fps/480fps (NTSC) Record Frame Rate 100fps/200fps/400fps (PAL); 120fps/240fps/480fps (NTSC) Audio input RCA X1 Audio output...
  • Page 91 450011000335 A0...

Table of Contents