Subscribe to Our Youtube Channel
Related Manuals for COP-USA DVR2708TE-TVI
Summary of Contents for COP-USA DVR2708TE-TVI
- Page 1 DVR User Manual For H.264 4/8/16-channel digital video recorder All rights reserved...
- Page 2 HD-TVI DVR User Manual CAUTION Please read this user manual carefully to ensure that you can use the device correctly and safely. There may be several technically incorrect places or printing errors in this manual. The updates will be added into the new version of this manual. The contents of this manual are subject to change without notice.
-
Page 3: Table Of Contents
HD-TVI DVR User Manual Table of Contents Introduction ........................1 1.1 DVR Introduction ........................ 1 1.2 Main Features ........................1 Hardware Installation ....................... 3 2.1 Install Hard Drive ........................ 3 2.2 Front Panel Descriptions ...................... 3 2.3 Rear Panel Instructions ......................4 2.4 Remote Controller ....................... - Page 4 HD-TVI DVR User Manual 4.5.4 Alarm Out ........................22 4.6 Network Configuration ...................... 22 4.6.1 Network .......................... 22 4.6.2 Sub Stream ........................23 4.6.3 Email ..........................24 4.6.4 Server ..........................25 4.6.5 NAT ..........................25 4.6.6 Other Settings ......................... 26 4.7 User Management Configuration ..................
- Page 5 HD-TVI DVR User Manual 7.5.1 Remote Playback ......................47 7.5.2 Remote Backup....................... 50 7.6 Remote System Configuration ................... 50 7.7 Tools ..........................51 7.8 Remote Management ......................51 Appendix A FAQ ......................... 52 Appendix B Calculate Recording Capacity ..............56 Appendix C Compatible Devices ..................
-
Page 6: Introduction
HD-TVI DVR User Manual Introduction 1.1 DVR Introduction This model is standard 4/8/16 CH real time real time 1080P high resolution DVRs, which adopts high performance video processing chips and embedded Linux system. Meanwhile, it utilizes many most advanced technologies, such as standard H.264 with low bit rate, Dual stream, SATA interface, VGA output mouse supported, IE browser supported with full remote control, mobile view(by phones), etc., which ensure its powerful functions and high stability. - Page 7 HD-TVI DVR User Manual Supports pre-recording and post recording PTZ CONTROL Supports various PTZ protocols Supports 128 PTZ presets and 8 auto cruise tracks Supports remote PTZ control through internet SECURITY Customize user right: log search, system setup, two way audio, file management, disk management, remote login, live view, manual record, playback, PTZ control and remote live view Supports 1 administrator and 63 users...
-
Page 8: Hardware Installation
HD-TVI DVR User Manual Hardware Installation 2.1 Install Hard Drive Check the unit and the accessories after getting the DVR. Please don’t power up the unit till the physical installation is complete. Notice: 1. This series support two SATA hard drives. Please use the hard drive the manufacturers recommend specially for security and safe field. -
Page 9: Rear Panel Instructions
HD-TVI DVR User Manual Notice: The front panel descriptions are only for reference; please make the object as the standard. Front panel I Name Description When recording, the light is blue When access to network , the light is blue Power Power indicator, when connection , the light is blue Switch the output between VGA and HDMI... -
Page 10: Remote Controller
HD-TVI DVR User Manual Rear Panel for 4 CH Rear Panel for 8 CH Rear Panel for 16 CH Name Descriptions DC12V DC12V Power Input To connect external USB devices like USB mouse or USB storage device Network Port HDMI HDMI Port. -
Page 11: Control With Mouse
HD-TVI DVR User Manual Button Function Record manually To enter search mode. Search To enter menu. MEUN To exit the current interface. Exit To confirm the choice or setup. ENTER Direction To move cursor in setup button ZOOM To zoom in To set picture in picture control playback. - Page 12 HD-TVI DVR User Manual menu. In order to input a value in a particular screen, move cursor to the input box and click. An input window will appear as below. It supports digits, alphabets and symbols input. Click Shift button to input Capital letters and symbols; click Shift button again to return. It supports mouse drag.
-
Page 13: Basic Function Instruction
HD-TVI DVR User Manual Basic Function Instruction 3.1 Power On/Off Before you power on the unit, please make sure all the connection is good. 3.1.1 Power On Connect with the power. The device will boot and the power LED would turn blue. A WIZZARD window will pop up and show some information about time zone, time setup, network configuration, record configuration and disk management. -
Page 14: Live Preview
HD-TVI DVR User Manual 3.3 Live Preview Fig 3-2 Live Preview Interface Symbol Meaning Green Manual record Yellow Motion detection record Blue Schedule record 3.4 Live Playback Click Playback button to playback the record. Refer to Fig 3-3. User can do complete operation by clicking the buttons on screen. -
Page 15: Main Menu Setup Guide
HD-TVI DVR User Manual Main Menu Setup Guide Click right mouse or press FN/ESC button on the front panel and then the control bar will display at the bottom of the screen. Refer to Fig 4-1: Fig 4-1 Main Menu Toolbar Screen Mode: Click to choose screen mode. -
Page 16: System
HD-TVI DVR User Manual 4.1.1 System Go to MenuÆSetupÆBasic ÆSystem interface. Refer to Fig 4-3: Fig 4-3 Basic Configuration-System In this interface you can set up the device name, device ID, video format, max network users, VGA resolution, language and so on. The definitions for every parameters display as below: Device Name: The name of the device. -
Page 17: Dst
HD-TVI DVR User Manual Fig 4-4 Basic Configuration-Date & Time Set the date format, time format, time zone in this interface; checkmark “sync time with NTP server” to refresh NTP server date. You can also adjust system date manually. Click “Apply” button to save the setting. 4.1.3 DST Go to MenuÆSetupÆBasic ÆDST interface. -
Page 18: Main Monitor
HD-TVI DVR User Manual Go to MenuÆSetupÆLive. Refer to Fig 4-6: Fig 4-6 Live Configuration-Live A software keyboard will pop up by clicking camera name area. Click the letters and (or) digital numbers on the keyboard to input the name you want to display in live image. Checkmark the camera name in the show name area. -
Page 19: Mask
HD-TVI DVR User Manual 4.2.3 Mask If there is something you don’t want to display in the live image. You can set mask. For a given channel a maximum of three areas can be masked. To set up mask area: Go to MenuÆSetupÆLive ÆMask interface. -
Page 20: Enable
HD-TVI DVR User Manual Before Configuration, please make sure your DVR has been installed with HDD and has completed its initialization. 4.3.1 Enable Go to MenuÆSetupÆRecordÆEnable interface. Refer to Fig 4-10: Fig 4-10 Record Configuration-Enable Parameter Meaning Record To enable/disable recording for the channel Audio To enable/disable audio recording for the channel Checkmark record and audio. -
Page 21: Time
HD-TVI DVR User Manual Click “Apply” button to save the setting. Parameter Meaning 720P: 1-30 NTSC 1-25(PAL); 1080P: 1-15 NTSC 1-12(PAL) Rate This series supports 720P, 1080P Resolution The higher the value is, the clearer the recorded image is. Six options: Quality lowest, lower, low, medium, higher and highest. -
Page 22: Recycle Record
HD-TVI DVR User Manual Fig 4-13 Record Configuration-Stamp Checkmark camera name and time stamp. Click “Setting” button to set up the position of the stamp. You can drag the camera name and time stamp at random positions. Refer to below Figures: Before drag After drag Select “All”... -
Page 23: Schedule
HD-TVI DVR User Manual 4.4.1 Schedule This tab allows defining schedule for normal recording for seven days of a week, 24 hours of a day. Every row denotes an hourly timeline for a day. Click the grid to do relevant setup. A highlighted area denotes selected timeline. -
Page 24: Alarm Configuration
HD-TVI DVR User Manual Go to MenuÆSetupÆSchedule ÆMotion tab. The setup steps for schedule for motion based recording are similar to normal schedule setup. You can refer to 4.4.1 Schedule for details. Note: The default schedule of motion based recording is 24 7. If you want to activate motion based recording, you must enable motion alarm and set up schedule for motion alarm (see Chapter 4.5.1 Motion Alarm for more details). - Page 25 HD-TVI DVR User Manual Fig 4-17 Alarm Configuration-Motion Trigger Buzzer: If selected, the local buzzer would be activated on an alarm. Show Full Screen: If selected, there will pop up the chosen channel on the monitor on an alarm trigger. Email: If selected, the DVR will send an email alert to the preconfigured email address in case of a motion based alarm from the particular input.
-
Page 26: Video Loss
HD-TVI DVR User Manual Note: Prior to setting motion detection field it is recommended that you click icon to clear the existing field and set afresh. Select “All” to set the same settings for all channels. Click “Apply” button to save the setting. Go to Schedule tab. -
Page 27: Alarm Out
HD-TVI DVR User Manual Fig 4-20 Other Alarm 4.5.4 Alarm Out To set up alarm out: Go to MenuÆSetupÆAlarmÆAlarm Out. Refer to Fig 4-21: Fig 4-21 Alarm Out Checkmark Buzzer and set buzzer alarm hold time. This would trigger the buzzer when the system is on an alarm. -
Page 28: Sub Stream
HD-TVI DVR User Manual and IP address is http://192.168.0.25 you should input the following IP address: http://192.168.0.25:82 into IE browser. Set server port. The default server port is 6036. Fig 4-22 Network Configuration-Network Connect internet. There are three ways to connect internet. ¾... -
Page 29: Email
HD-TVI DVR User Manual Fig 4-23 Network Configuration-Sub Stream Parameter Meaning Range from: 1-25 Support CIF Resolution The quality of the clients’ image. The higher the value is, the clearer the Quality record image. Six options: lowest, lower, low, medium, higher and highest. VBR and CBR Encode Range from: 256~1792kbps... -
Page 30: Server
HD-TVI DVR User Manual Attaching image: If selected, the system will attach images when sending emails. 4.6.4 Server This function is mainly used for connecting ECMS/NVMS. The setting steps are as follows: In the server interface, select “Enable” as shown in the Fig 4-25. Fig 4-25 Network Configuration-Server Check the IP address and port of the transfer media server in the ECMS/NVMS. -
Page 31: Other Settings
HD-TVI DVR User Manual www.autonat.com ; the default Port number is 8989). Click “Apply” to save the settings. 4.6.6 Other Settings If your DVR is set to use PPPoE as its default network connection, you may set up DDNS to be used in connection. - Page 32 HD-TVI DVR User Manual 2. Create domain name. 3. After you successfully request your domain name, you will see your domain in the list. ¾ DVR Setting Connect DVR to the Network Client. 1. Go to Main menuÆSetupÆNetworkÆOther Settings, checkmark DDNS, select “dvrdydns”...
-
Page 33: User Management Configuration
HD-TVI DVR User Manual If your IP address is not WAN IP address, you should forward your IP address and port in your router or enable UPnP function both in router and DVR. Then you can use the domain name plus HTTP port to access your DVR. - Page 34 HD-TVI DVR User Manual Click “Add” button to display a dialog box as Fig 4-29: Fig 4-29 Add-General In General tab, input username, password and select user type. You can also check “Binding PC MAC Address” and input this address. Click “OK”...
-
Page 35: Configuration
HD-TVI DVR User Manual Go to MenuÆSetupÆUsers interface. Select the added user you want to modify and then click “Modify” button to do the relevant operation. To change user password Go to MenuÆSetupÆUsers interface. Select the added user you want to change its password and then click “Change Password”... - Page 36 HD-TVI DVR User Manual Fig 4-32 P.T.Z configuration-advanced To set up preset: In the Advanced interface, click preset “Setting” button to see a dialog box as Fig 4-33: Fig 4-33 Advanced-Preset Setting In the preset setting tab, enable preset, set the preset name and then click preset “Setting”...
- Page 37 HD-TVI DVR User Manual Click Save button to save the setting. Click icon to hide the tool bar. Right click to view this bar again. Click icon to exit the current interface. Return to the Advanced-Preset Setting interface and click OK button to save the setting. To set up cruise: Click cruise “Setting”...
-
Page 38: Advanced
HD-TVI DVR User Manual right and adjust the rotate speed and the value of zoom, focus and iris of the dome. Click Start Record button to record the move track of PTZ. Click this button again to stop record. Click Start track button to play recorded track. Click icon to exit the current interface. -
Page 39: Search, Playback & Backup
HD-TVI DVR User Manual Search, Playback & Backup Search configuration includes four submenus: time search, event search, file management and image. 5.1 Time Search Go to MenuÆSearch ÆTime Search. Refer to Fig 5-1: Fig 5-1 Search Configuration-Time Search Select date and channels on the right hand side and press the ‘Search’ button. A date with highlighted borderline indicates presence of data. -
Page 40: Event Search
HD-TVI DVR User Manual 5.2 Event Search Go to MenuÆSearchÆEvent Search button. Refer to Fig 5-2: Fig 5-2 Search Configuration-Event Search Select date and channels on the right hand side. A data with highlighted borderline indicates presence of data. Checkmark Motion or All accordingly. Click Search button to display the searched event information in the event list box. -
Page 41: Search By Image
HD-TVI DVR User Manual Click Search button to display the searched files in the file list box. Use “All” button to lock/unlock or delete all files in the file management column. Double click an unlocked item to play. Lock: Select a file and click Lock button to lock this file, after that, that file will not be deleted or covered. - Page 42 HD-TVI DVR User Manual Fig 5-5 Backup Configuration Select a required file or checkmark “All” to select all data files. Click Backup button to display Backup information window. In the backup information interface, you can check the relevant information of backup files, storage type, save file type, etc.
-
Page 43: Manage Dvr
HD-TVI DVR User Manual Manage DVR 6.1 Check System Information Check system information includes seven submenus: system, event, log, network, online user, record and QRCODE. 6.1.1 System Information In this interface, you can check the hardware version, MCU version, kernel version, device ID, etc. -
Page 44: Disk Management
HD-TVI DVR User Manual Fig 6-1 Information Configuration In this interface, you can scan the QRCODE through the mobile phone. Refer to Fig 6-2: Fig 6-2 Information Configuration-QRCODE 6.2 Disk Management To format the disk Go to disk management interface. Note: please format the hard disk before record. -
Page 45: Upgrade
HD-TVI DVR User Manual dielectric material of the disk, analysis the potential problems of the disk and warn so as to protect its data. 6.3 Upgrade At present, it only supports USB update. Get the software from your vendor when there is a new software version. -
Page 46: Remote Surveillance
HD-TVI DVR User Manual Remote Surveillance 7.1 IE Remote Surveillance by NAT 7.1.1 NAT Settings The DVR shall be powered on and connected to the network. Go to MenuÆSetupÆNetworkÆNetwork. You can obtain the IP address, Subnet Mask and Gateway automatically. You can also manually input them according to the configuration of PC. -
Page 47: Ie Remote Surveillance Via Lan & Wan
HD-TVI DVR User Manual 7.2 IE Remote Surveillance via LAN & WAN In order to view the DVR from a network it may be connected to LAN/WAN or internet. The network setup should be done accordingly. Please refer to 4.6 Network Setup. 7.2.1 Via LAN Go to the DVR’s Main MenuÆSetupÆNetwork interface to input IP address, Subnet Mask, etc .If using DHCP, please enable DHCP in both the DVR and the router. -
Page 48: Remote Surveillance Through Apple Pc
HD-TVI DVR User Manual will connect to the server and would give a confirmation message. When accessing the remote interface of DVR, user can input WAN IP to access directly (user can Go to Main menuÆInformationÆNetwork interface to check IP address). The browser will download Active X control. -
Page 49: Via Wan
HD-TVI DVR User Manual After acquiring the IP address, Subnet Mask and so on, please Go to the DVR’s Main MenuÆSetupÆNetwork interface to manually input IP address, Subnet Mask and Gateway according to the configuration of PC. The network segment should be the same as the PC. -
Page 50: The Remote Live Preview
HD-TVI DVR User Manual The network setups are the same as step one to step four of point 1 on WAN of IE remote surveillance. Enter WAN IP and HTTP port in the Safari browser to install the Active control. The concrete steps are the same as of Chapter 7.3.1. - Page 51 HD-TVI DVR User Manual Click “Snap” icon to automatically capture pictures and save those pictures in the computer. You can set up the save path for those picture in the Remote Preview interface Æ Configuration ÆLocal configuration. PTZ control Please connect speed dome to the device via RS485 firstly, make sure the protocol of the speed dome is supported by the device and set the relative parameters manually.
-
Page 52: Remote Playback & Backup
HD-TVI DVR User Manual Fig 7-2 Right Key Sub Menu Stream: This DVR supports master stream and sub stream. Master stream has higher frame rate, max 25FPS PAL /30 FPS NTSC for every channel, but it needs higher network bandwidth simultaneously. Sub stream has low frame rate, max 6FPS PAL /7FPS NTSC for every channel, it requires low network bandwidth. - Page 53 HD-TVI DVR User Manual This DVR supports remote time search, event search and file management. By Time Search: Go to SearchÆTime Search. Refer to Fig 7-4: The highlight date in the area indicates recorded data. Select the date in area record channels in area Click “Search”...
- Page 54 HD-TVI DVR User Manual By Event Search: Go to SearchÆEvent Search interface. Refer to Fig 7-6: Click the highlight date and select record channels. Checkmark the event type: motion. Click “Search” button. Double-click certain item to play. Fig 7-6 Event Search Interface File Management Go to SearchÆFile Management interface.
-
Page 55: Remote Backup
HD-TVI DVR User Manual that ca not be deleted or overlaid. Unlock: Select a locked file and then click “Unlock” button to unlock this file. Delete: Select an unlock file and then click “Delete” button to delete this file from file list. 7.5.2 Remote Backup Click Backup button to go to backup interface. -
Page 56: Tools
HD-TVI DVR User Manual Fig 7-9 Remote Menu Setup 7.7 Tools Click on the tool’s tab to access the Disk Management tool. The user can view the status of the hard drive(s), can view/change the read write properties and can also format the hard drive(s). -
Page 57: Appendix A Faq
HD-TVI DVR User Manual Appendix A FAQ Q1. Why the DVR doesn’t turn on after connecting to the power? The power adapter could have gone bad. Please change a new power adapter. The power from the adapter may be not enough for operating the DVR. Please use the power adaptor supplied along with the DVR. - Page 58 HD-TVI DVR User Manual IE browser blocks ActiveX. Please do setup as per the steps mentioned below. Open IE browser. Click ToolsÆInternet Options. Select SecurityÆCustom Level. Refer to Fig 7-1; Enable all the sub options under “ActiveX controls and plug-ins”. Refer to Fig 7-2; Then click Ok to finish setup.
- Page 59 HD-TVI DVR User Manual Q10: A hard disk is being identified as a new device however it was being used with another DVR of same model. Should it be formatted prior use? It is possible to migrate an HDD from one DVR to another provided that the DVRs are of the same model and that the HDD being migrated would be used as the sole disk in the new DVR.
- Page 60 HD-TVI DVR User Manual Q13. How to play the backup file? Insert your USB device where the backup files are saved in the USB port of PC. If your files are saved in DVR format, you must have already downloaded the backup player box before doing backup.
-
Page 61: Appendix B Calculate Recording Capacity
HD-TVI DVR User Manual Appendix B Calculate Recording Capacity Users can calculate the size of hard disk according to the saving time and DVR recording settings. The DVR uses fixed video bit rate. The below are the details at different settings. Resolut Frame Rate Bit Rate... -
Page 62: Appendix C Compatible Devices
HD-TVI DVR User Manual Appendix C Compatible Devices Compatible USB drive after test Brand Capacity 512MB/1G/2GB Netac Kingston Aigo Smatter vider SanDisk 2. Compatible HDD list Brand Capacity Seagate Barracuda 80G/160G/250G/320G /1.5T/2TB/3TB Seagate SV35.3 Seagate Pipeline HD.2 500G Maxtor Diamondmax 160G HITACHI Deskstar 80G/160G... -
Page 63: Appendix D 4 Ch Specifications
HD-TVI DVR User Manual Appendix D 4 CH Specifications Compression format H.264 Main Profile Video output VGA × 1, HDMI × 1 Video Input BNC × 4 HDMI/VGA Resolution 1080 × 1920 / 1280 ×1024 / 800 × 600 Record Resolution 720P (1280 ×... -
Page 64: Appendix E 8 Ch Specifications
HD-TVI DVR User Manual Appendix E 8 CH Specifications Compression format H.264 Main Profile Video output VGA × 1, HDMI × 1 Video Input BNC × 8 HDMI/VGA Resolution 1080 × 1920 / 1280 ×1024 / 800 × 600 Record Resolution 720P (1280 ×... -
Page 65: Appendix F 16 Ch Specifications
HD-TVI DVR User Manual Appendix F 16 CH Specifications Compression format H.264 Main Profile Video output VGA × 1, HDMI × 1 Video Input BNC × 16 HDMI/VGA Resolution 1080 × 1920 / 1280 ×1024 / 800 × 600 Record Resolution 720P (1280 ×... - Page 66 450011000575 A1...
Need help?
Do you have a question about the DVR2708TE-TVI and is the answer not in the manual?
Questions and answers