Related Manuals for Holemaker Technology HMT MAX30
Summary of Contents for Holemaker Technology HMT MAX30
- Page 1 USER MANUAL HMT MAX30 Magnetic Drilling Machine PLACE MACHINE MOTOR STICKER HERE SERIAL NO.____________ DATE OF PURCHASE __________...
- Page 2 Congratulations on your purchase of the HMT MAX30 Portable Magnetic Drilling Machine. Your model is designed to produce superior holes quickly and efficiently. Through years of experience, constant innovation and development, HMT is committed to provide you with cutting tool innovation to speed up metalworking.
- Page 3 Fig. 1 HMT_MAX30_V1...
- Page 4 Explanation of terms used and Pictograms marked on tool HMT_MAX30_V1...
-
Page 5: General Power Tool Safety Warnings
GENERAL POWER TOOL SAFETY WARNINGS Do not use this power tool before you have thoroughly read and completely understood this Instruction Manual and the “General Safety Instructions”, including the figures, specifications, safety regulations and the signs indicating DANGER, WARNING and CAUTION. WARNING: When using electrical tools basic safety precautions should always be followed to reduce the risk of fire, electrical shock and personal injury including following. - Page 6 2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. 3. Avoid accidental starting. Be sure switches are off before plugging in. 4.
- Page 7 ADDITIONAL SPECIFIC SAFETY RULES FOR MAGNETIC DRILLING MACHINES • Keep your fingers well out of the drill area; • Avoid touching the drilled core that is automatically ejected by the centering pin when the working procedure is finished. Contact with the core when it is hot, or if it falls, can cause personal injuries;...
-
Page 8: Residual Risks
• Safety chains or similar restraints should be used to prevent a magnet drill falling in the event of a power cut to the electromagnetic base. Use extra caution with generator power supply for this reason • Wear approved Eye / Face guard, ear protection and hand protection at all times. •... - Page 9 POSITION Serial number The Serial Number, which also includes the type of machine, the year and month of manufacturing and identification number, is engraved on the frame, magnet and the motor unit. Example: 30 14 09 001 Model type Year of Manufacture Month of manufacture Identification number Package Contents...
- Page 10 TECHNICAL DATA HMT MAX30 ANNULAR CUTTERS ø 12 - 30 mm TWIST DRILLS ø 1 - 13 mm MAX. DEPTH OF CUT 48 mm LENGTH 220 mm WIDTH 170 mm HEIGHT 293-383 mm STROKE 90 mm WEIGHT 8,5 kg MAGNET (L x W x H)
-
Page 11: Description (Fig. 1)
DESCRIPTION (fig. 1) WARNING: Never modify the power tool or any part of it. Damage or personal injury could result. 1. Safety Guard 2. Feed handle 3. Cooling system tank 4. Magnetic stand 5. Magnet switch 6. Motor switch INTENDED USE This magnetic drilling machine is intended for commercial use as a drilling machine for drilling materials with a magnetizable surface using annular cutters and twist drill. - Page 12 If the supply cord is damaged, it must be replaced by a specially prepared cord available through the HMT service organization. EXTENSION CABLE If an extension cable is required, use an approved 3-core extension cable suitable for the power input of this tool (see technical data).The minimum conductor size is 1.5 mm²; the maximum length is 30 meter.
-
Page 13: Prior To Operation
INSERTING AND REMOVING AN ACCESSORY The tool holder accepts annular cutters with a 19,05 mm Weldon shank with one or more flats. WARNING: The teeth of a cutter are very sharp and can be dangerous. 1. In order to fit an annual cutter it is necessary to remove the guard (1); 2. - Page 14 TURNING MACHINE ON AND OFF THE CONTROL PANEL The control panel on your magnetic drilling machine is designed for maximum operating facility and safety. Fig.2 In order to operate properly, the machine has to be turned on following the procedure as describedbelow.
- Page 15 If your machine is equipped with a auto coolant system, put open the valve to release the oil. If your machine does not have a auto coolant system, fill the holes of the spindle with oil. Turn the motor on at the highest setting and allow it to run at full speed. Turn the arms to start drilling.
- Page 16 Some materials of low hardness contain abrasive substances leading to rapid cutting edge wear at high speeds. Feed rates are governed by rigidity of set-up, volume of material to be removed, surface finish and available machine power. LUBRICATION IN HORIZONTAL APPLICATIONS •...
-
Page 17: Maintenance
MAINTENANCE Your HMT power tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning. CAUTION: To reduce the risk of injury, turn unit off and disconnect machine from power source before installing and removing accessories, before adjusting or changing set- ups or when making repairs. - Page 18 ADJUSTMENT OF SLIDE An essential requirement of the machine is that the slide can move in a smooth and controlled manner, free of lateral movement and vibration. This situation can be maintained by periodic adjustment of the slide and is accomplished in the following manner: 1.
-
Page 19: Troubleshooting
TROUBLE SHOOTING Magnet and motor do not - The magnet switch is not connected to the power supply function - Damaged or defective wiring - Defective fuse - Defective magnet switch - Defective Control Unit - Defective power supply Magnet does function, the - Damaged or defective wiring motor does not work - Carbon brushes are stuck or worn out... -
Page 20: Protecting The Environment
Frame under voltage - Damaged / defective wiring - Defective magnet - Motor seriously dirty Fuse blows when magnet - Damaged or defective wiring switch is turned on - Wrong value fuse - Defective magnet switch - Defective Control Unit - Defective magnet Fuse blows when motor is - Damaged or defective wiring... - Page 21 SPARE PART LIST HMT MAX30 Article Description Article Description 030E.5001 Motor unit 220-230V 030E.5035 Spindle inc. spring set 030E.5002 Motor unit 110-120V 020.0136 Fixing Screw M8x8 032.0106 Screw BK4,8 x 55 030E.5037 Spring set HMT MAX30 032.0111 End Cover 030E.5042 Guide rail LEFT 032.0136...
- Page 22 HMT_MAX30_V1...
- Page 23 EXPLODED DRAWING HMT MAX30 MOTOR UNIT HMT_MAX30_V1...
-
Page 24: Ce/Emc Declaration Of Conformity
Designation/ function Magnetic Drilling Machine Type HMT MAX30 Ratings and principal 230-240V, 50/60Hz, Class I HMT MAX30 | 900 W | N0: 775 minˉ¹ Characteristics Applicable EC Directives Machinery Directive 2006/42/EC Relevant standard(s) / EN 55014-1:2006/+A1:2009/+A2:2011 Specification(s) / Directive(s)
Need help?
Do you have a question about the HMT MAX30 and is the answer not in the manual?
Questions and answers