General Power Tool Safety Warnings; Save All Warnings And Instructions For Future Reference - Makita BUC122 Instruction Manual

equipment and batteries and battery
pack(s) that have reached the end of their
life must be collected separately and
returned to an environmentally compatible
recycling facility.
Intended use
The tool is intended for cutting branches / pruning trees.
It is also suitable for tree service.
Noise
The typical A-weighted
according to EN60745:
Model BUC121
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 2 dB (A)
Model BUC122
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 2 dB (A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Model BUC121
Work mode : cutting wood
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model BUC122
Work mode : cutting wood
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test method
and may be used for comparing one tool with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power
•
tool can differ from the declared emission value
depending on the ways in which the tool is used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
noise level determined
) : 84 dB (A)
pA
) : 92 dB (A)
WA
) : 84.6 dB (A)
pA
) : 92.7 dB (A)
WA
value (tri-axial vector
2
) : 4.2 m/s
h
2
2
) : 4.3 m/s
h
2
For European countries only
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
ENE090-1
machine(s):
Designation of Machine:
Cordless Chain Saw
Model No./ Type: BUC122
ENG905-1
Specifications: see "SPECIFICATIONS" table.
are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN ISO 11681-2
The
No.4811004.13002
The EC-Type
performed by:
DEKRA Testing and Certification GmbH
Enderstraße 92b
01277 Dresden
Germany
Identification No. 2140
The technical documentation is kept by:
ENG900-1
Makita International Europe Ltd.
Technical Department,
sum)
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex V.
Measured Sound Power Level: 93.0 dB (A)
Guaranteed Sound Power Level: 95.0 dB (A)
000230
ENG901-1
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for
future reference.
6
Corporation as
EC-Type Examination
Examination per 2006/42/EC
5.11.2013
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
ENH030-4
the responsible
Certificate
was
GEA010-1