Siemens HM736G1 1 Series User Manual And Installation Instructions page 21

Tone Selection
1
Button tone ¡ On
¡ Off
Audible signal ¡ Very short duration
¡ Short duration
¡ Medium duration
¡ Long duration
1
Factory setting (may vary according to model)
Device Set- Selection
tings
Fan run-on ¡ Minimum
time
¡ Recommended
¡ Long
¡ Very long
Lighting ¡ On when cooking and opening
the door
¡ Only when the door is opened
¡ Always off
Microwave out- ¡ 90 W
put presetting
¡ 180 W
¡ 360 W
¡ 600 W
¡ Boost
Continue to ¡ On
1
microwave
¡ Off
1
Dry microwave ¡ On
¡ Off
1
Factory setting (may vary according to model)
Personalisa- Selection
tion
Brand logo ¡ Indicators/symbols
¡ Do not display
Operation after ¡ Main menu
switch-on ¡ Types of heating
¡ Microwave
¡ Dishes
¡ Favourites
1
Factory setting (may vary according to model)
17 Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tips
¡ Please consult the documents supplied by
Home Connect.
¡ Please also follow the instructions in the Home Con-
nect app.
1
1
1
1
1
1
Personalisa- Selection
tion
Elapsed cook- ¡ Displays
ing time
¡ Do not display
Microwave ¡ On
baking tray
¡ off
1
Dishes ¡ All
¡ No pork
¡ Kosher only
1
Regional ¡ All
dishes
¡ European dishes
¡ British dishes
Childproof ¡ Keylock only
lock
¡ Deactivated
Automatic ¡ On
rapid heating
¡ Off
1
Factory setting (may vary according to model)
Factory set- Selection
tings
Factory set- ¡ Restore
tings
Appliance in- Appliance information
formation
16.2 Changing the basic settings
Press in the status bar.
1.
Press the required basic setting area.
2.
Press the required basic setting.
3.
Press to select the required basic setting.
4.
a The change is applied directly for most basic set-
tings.
To change additional basic settings, use
5.
back and select a different basic setting.
To exit the basic settings, use
6.
main menu or switch off the appliance using
a The changes are saved.
Note: Your changes to the basic settings will be re-
tained even after a power failure.
Notes
¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→ "Safety", Page 2
¡ Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡ In networked standby mode, the appliance requires
a maximum of 2 W.
Home Connect en
1
1
1
1
to go back to the
to go
⁠ .
21