Margin Adjustment (Second Side) - Canon Cassette Feeding Unit-AM1 Service Manual

Margin Adjustment (Second side)

1. Make 2-sided copies using the Cassette 3 and check that the left edge margin is 2.5 +/- 2.0 mm.
2. As for nonstandard, change the left edge margin adjustment value for the second side of the 2-sided copy from the
Cassette 3.
Service Mode > COPIER > ADJUST > FEED-ADJ > ADJ-C3RE and set 1 value larger, the left edge margin becomes 0.1mm
larger.
3. Enter the value set to the left edge margin adjustment value for the second side of the 2-sided copy from the Cassette
3 as the left edge margin adjustment value for the second side of the 2-sided copy from the Cassette 4.
Service Mode > COPIER > ADJUST > FEED-ADJ > ADJ-C4RE
4. Make 2-sided copies using the Cassette 4, and check that the left edge margin is 2.5 +/- 2.0 mm.
5. As for nonstandard, change the left edge margin adjustment value for the second side of the 2-sided copy from the
Cassette 4.
As making the following selection: Service Mode > COPIER > ADJUST > FEED-ADJ > ADJ-C4RE and set 1 value larger,
the left edge margin becomes 0.1mm larger.
6. Enter the new adjustment value on the Service Label.
• ADJ-C3RE
• ADJ-C4RE
7. Get out from the service mode.
Feeding direction
of paper
image
66
6. Installation