Connecting To Ethernet For Rss Feeds And Weather Forecasts; Connection To Main Power Supply; Extended Connections For Your Home Entertainment; Starting Up For The First Time - THOMSON THT712 User Manual

3.5 Connecting to Ethernet for RSS feeds and weather
forecasts
To use this option of your receiver it must be connected to your router. Connect the Ethernet
(RJ-45) connector with a class CAT5E (or higher) cable to your router.

3.6 Connection to main power supply

After all the connections are done you can connect your digital receiver to the mains power.
Make sure that the main power switch on the rear panel is set to ON.
3.7 Extended connections for your home
entertainment
Connecting to a Digital Audio Amplifier with S/PDIF
By connecting your receiver to a digital amplifier or home cinema set, you can enjoy the best
possible sound quality and multi-channel audio (depending on broadcast). Connect your Digital
Audio Amplifier or home cinema set with a suitable cinch cable to the S/PDIF connector on the
back of the receiver. Alternatively, if you're using an analogue amplifier, then connect the audio
output jack for stereo audio.
Connecting to a digital audio amplifier and TV using HDMI
By connecting your receiver to an HDMI equipped digital amplifier or home cinema set you
will enjoy the best possible sound quality and multi-channel audio (depending on broadcast).
Connect the HDMI output of the unit to an input of your amplifier, and then connect the HDMI
output of the amplifier to your TV set. Select the correct input on your amplifier to watch and
listen to programmes.

4.0 STARTING UP FOR THE FIRST TIME

When you use your receiver for the first time, the Welcome "Preferred Language" menu
appears. Use pq to move the highlight to the language you wish to use in the menu. Once
you have selected your language, press the GREEN Next button to confirm and go to the
next page. The receiver will now show the "First Time Installation" screen where you can adapt
important settings.
Use pq to move the highlight to the setting you wish to adapt and use t u to change values.
Press the GREEN Next button to confirm and to go to the next page or press the RED Back
button to go one menu step back. The following settings are available:
Region:
8
Select the region in which the receiver is used. The selection Germany
will store all German channels below number 200 and others above. After
searching, German channels can be sorted in the channel list below 200
in your preferred order. The selection Italy and France will store channels
Fig. 7
Fig. 7
Fig. 8