Randell 53330LPPO Specifications

Custom Remote Refrigerated Storage
model 53330LPPO
53368LPPO
Description:
Remote drawer base refrigerator storage units with mechanically cooled
pan opening. These units are offered in variety of lengths to meet your
specific base storage or pan storage requirements. The mechanically cooled
pan opening uses Randell's exclusive design technologies, such as our
Exclusive Refrigerated Pan Opening Thermostat allowing customers
to make adjustments to the opening temperatures (independent of the
base). The base is designed with a "low-profile" cabinet and is supplied
with a plate shelf above the refrigerated door openings.
These units feature our Patented Drawer Cartridge Assembly.
A fully welded, unitized drawer cartridge assembly with a quick release
that allows the refrigerated drawers to be easily removed for cleaning.
This equipment is intended for use in rooms having an ambient temperature of
86˚F (30˚C) or less.

Specifications:

CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge
stainless steel with 2 1/2" nosing. Backsplash to be coved cornered,
with 45˚ return at top and overall height of 6 3/4". Ends at top fitted
with recessed heavy duty steel bars for field bolting units together,
producing a hairline seam. Exterior body to be corrosion resistant steel.
Door opening frames are ABS and contain magnetic strip for positive
seal of door gaskets. Work surface to be at 36" work height. Legs to be
6" high stainless steel with adjustable bullet foot. Legs mounted to full
length channel frame assembly which is integrally welded to bottom of
body assembly. Legs can be moved left to right to avoid floor obstacles
during installation.
CABINET INTERIOR: Base interior to be ABS thermoplastic at ends only.
Stainless steel interior liner to be coved cornered to form bottom, back
and top. One baked enamel finished shelf provided behind each door.
Unit insulation to be CFC free foamed in place urethane.
REFRIGERATED DRAWERS: Fully welded, unitized drawer cartridge
assembly - patented. Heavy duty full extension 14 gauge drawer tracks
on 1 5/8" heavy duty stainless steel bearings. Will accommodate (2)
12" x 20" x 4" deep pans per drawer (pans not included). Quick release
allows drawers to be easily removed for cleaning. Stainless fronts,
mounted to drawer cartridge assembly with easy to grasp drawer
handles. Drawers are self-closing with press fit magnetic gaskets -
(designed for installation & removal without tools).
REFRIGERATION:Refrigerant to be specified by customer. System is a
balanced heavy duty set-up to accept hook-up to a single compressor
system. The base is cooled by an independent blower coiled operating on
its own expansion valve and thermostat and operates through a dedicated
solenoid valve. The pan opening is provided with its own expansion valve,
thermostat, and operates through its own dedicated solenoid valve (lo-
cated in the compressor housing) making it easily adjustable for specific
ambient conditions without effecting the balance of the system. An on/off
switch for the pan opening is provided.
53338LPPO 53343LPPO
53373LPPO 53385LPPO
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
models 53000LPPO
53355LPPO
model 53375LPPO shown with:
•optional finished end
•pan covers removed
•standard backsplash removed
Standard Features:
• "Low-profile" refrigerated cabinet with plate shelf above
• Low profile 2" recess pan design provides easy reach and optimal pan
temperatures & reliability
• Full Length Poly Cutting Board
• Front breathing compressor housing with directed air flow-Randell Exclusive
• Patented Drawer Cartridge System with easy maintenance Press-Fit gaskets
- A Randell Exclusive
• Pan opening thermostat- A Randell Exclusive
• Drain in pan opening for easy cleaning
• Hinged Removable stainless steel covers
• Automatic base defrost
• Foamed in place urethane insulation providing superior insulation and durability
• 6" high adjustable legs, moveable left to right if needed
• Available up to 16' under one common assembly
• Adapter bars are standard to accommodate a compliment of 1/6 size pans
• Filter dryer installed on each liquid line
Options & Accessories:
Hinged slide-back removable covers
Lift-Off (removable) night covers
Stainless Steel Ends
Stainless Steel Back
Laminate fronts, ends and back options
Casters in lieu of legs
Export voltages
Electric condensate evaporator
Wide pan opening
53360LPPO 53363LPPO
Randell Custom, Page 23a
Revised 09/04