Table of Contents
Advertisement
Problem
The screen hue changes suddenly /
The brightness changes and it be-
comes difficult to see bright colours
The Circle Pad doesn't
work properly
The Touch Screen doesn't
work properly
52
•
Is power-saving mode on?
Power-saving mode changes the brightness and colour gradient automatically according to
the content being displayed, to extend the battery charges for longer periods of time. This
can lead to pale colours whitening and other colours changing. To maintain fixed colour and
brightness level, turn power-saving mode off
•
Does Circle Pad input match what you see on screen?
In rare cases, the Circle Pad's input may stop working properly after long periods of use or
being used forcefully. If the in-game movements do not match the Circle Pad input, use the
CIRCLE PAD option in System Settings to calibrate the input
Note: If movements are being input despite the Circle Pad not being used, and you are unable to use
the buttons or Touch Screen, turn the system off, then start it again on the Circle Pad calibration screen
by pressing the POWER Button while pressing and holding L Button + R Button + Y Button.
•
Does the Touch Screen input match what you see on screen?
If the in-game movements do not match the Touch Screen input, use the TOUCH SCREEN
option in System Settings to calibrate the input
Note: If you are unable to use the Touch Screen to perform this procedure, turn the system off, then
start it again on the Touch Screen calibration screen by pressing the POWER Button while pressing
and holding L Button + R Button + X Button.
•
Have you attached a commercially available protective sheet to the Touch Screen?
If you have applied a commercially available protective sheet to the Touch Screen, refer to its
instruction manual and be sure it has been applied correctly before attempting to calibrate
the Touch Screen.
Not aligned
Solution
( p.
23).
( p.
41).
( p.
41).
Trapped air or dirt
Advertisement
Table of Contents
