Table of Contents
Advertisement
Connecting using AOSS
If your access point supports AOSS, you can set up a connection quickly and easily. Refer to the instruction manual for your access point in addition
to this manual.
Note: Using AOSS may cause your access point settings to change.
no longer be able to connect after using AOSS. Establishing a connection using an access point found through a search will not change any of
the access point's settings ( p. 37).
Touch
AOSS
1
Note: If you are using the tutorial and you have selected
2
Steps for the access point
Press and hold the AOSS button on the access point until the
AOSS light flashes twice in succession.
Note: If you have tried and failed several times to set up a connection using AOSS, wait approximately
5 minutes before trying again.
Once the setup complete screen appears, touch OK to begin a connection test
3
•
If the test is successful, setup is complete.
•
Failure to establish a connection can sometimes occur after AOSS setup is complete. If this happens, please wait a short while
before trying to reconnect.
If your computer is connected to the access point without using AOSS, it may
, start from step
.
2
AOSS button
35
Advertisement
Table of Contents
