Wiznet WIZ108SR User Manual page 20

Gateway module

Table of Contents

the connection will be closed for other system to be connected.

Inactivity Time also can be useful for the case when the server system is unexpectedly shut

down. In this status, if there is not any data communication during the time defined in the

Inactivity time, WIZ108SR will close the connection and enter into waiting status.

2) Search identification code

For the security issues, WIZ108SR can have its own password for searching. The password is

stored in the EEPROM of WIZ108SR, and it can be modified via this configuration tool. The

password can be any alphabet or number. Its length can be variable and its maximum length

is 8 bytes. The password is case sensitive.

3) Connection password

This function is available only when WIZ108SR works in server mode. If this function is

enabled, the remote client should send the password to WIZ108SR before data transmission.

Please, note the password is case sensitive.

4) Network protocol settings

There are two kinds of data transmission protocol: one is raw data transmission, and the

other is using Telnet (RFC2217).

But in current version, only the raw data transmission is supported.

If the 'Keep alive' function is enabled, WIZ108SR will send keep alive packet in every user

set minutes if no reply received after the user set period.

WIZ108SR User Manual

Arrow.com.

Downloaded from

(WIZnet Co., Ltd.)

Table of Contents