Figure 6. Simple Ping Test Program - Wiznet WIZ108SR User Manual

4) Reset
Reset and restart the selected module if you select the MAC Address from the tree and
click "Reset" button.
5) Factory
All value is initialized to Factory default value if you select the MAC Address from the
tree and click "Factory" button.
6) Ping
Popup the Simple Ping application program, you can test the ping operation.
7) Firewall
Popup the Windows Firewall setup program.
8) Exit
Close the configuration Tool Program.
9) Search window
If you click "Search" button, all the MAC address on a same subnet, will be displayed this
area. You can see the basic information such as Model name, Firmware version Etc.
10) Network Setting Method
Select IP setting mode, you can select one of Static, DHCP.
(PPPoE mode is not supported in the WIZ108SR)
- Using the follow IP Address (Static)
This is option for setting WIZ108SR module's IP with static IP address. Firstly, select
MAC address which you wanted to set as static IP in the board list. Then "Device IP,
Subnet, Gateway box" will be enabled. Input Static IP address and click "setting"
button. Then set the IP address as you want.
- DHCP
Set this option to use DHCP mode. Firstly, check 'DHCP' and click 'Setting' button. If IP
WIZ108SR User Manual
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from

Figure 6. Simple Ping Test Program

(WIZnet Co., Ltd.)
8