Getting Started; Configuration Tool; Network Configuration; Wiz108Sr Configuration Tool (Network Configuration Page ) - Wiznet WIZ108SR User Manual

2. Getting Started

2.1 Configuration Tool

2.1.1 Network Configuration

1) Search
The Search function is used to search all devices existing in the same LAN or in WAN. By
using UDP broadcast as shown in Figure 4, all connected devices in the same subnet will
be found. If the TCP unicast method is checked, the specified IP address must be given as
shown in Figure 5. The founded device will be listed in the "Serial to Ethernet" tree with
its MAC address.
Please, note the identification code must be input if the device has been configured with
one identification code.
WIZ108SR User Manual
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
Figure 3. WIZ108SR Configuration Tool (Network Configuration Page)
(WIZnet Co., Ltd.)
6