Advertisement
Available languages
Available languages
• Only use little tightening tape for the thread of the connection pipe and the dummy plug of the
drinker.
• Water conduit, blind plug and valve are only to be hand-screwed.
• When connecting pipes to the drinkers pay attention to cleanliness (no residues such as metal
spill, sand etc. inside the pipe).
• De-aerate pipe well!
3.2 Instructions for use and inspections
The inappropriate use of electrical units, in particular animal husbandry products,
involves certain risks!
Prior to bringing your heatable drinker into service pay attention to the following risk avoiding
measures:
•
The voltage of the type plate and the mains voltage have to be in accordance.
Attention: The SB 112 H/24 Volt drinker may only be operated in connection with a safety low
voltage transformer of max. 24 Volt.
•
All installation, repair and maintenance works may only be carried out by authorized
qualified technical staff.
•
The connection lead has to be installed in such away that it is out of reach for the animals.
•
The end of the connection cable (plug or junction box), however, must easily be accessible
for the user.
•
The unit has to be kept free from dust and impurities.
•
Clean the unit only with a soft cloth or a cloth that is moisturized with soap water.
•
This should be free from benzine or solvents as they may affect or damage the plastic.
•
Check your watering installation in regular intervals; damaged units or feed pipes should not
be used.
•
Switch your watering system off from the current during the non heated period (e.g.
summer).
Declaration of conformity
This unit is in conformity with the requirements of the following EU-Directives: 2006/95/EG
Advertisement
